Skip to product information
Sale
  • Sku: XPWR30X10093-OE

XPARTCO WR30X10093 (OE) Refrigerator Ice Maker

List Price:  $138.90
$98.50
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

WR30X10093 Refrigerator Ice Maker Assembly — XPARTCO OE

Product Description

The WR30X10093 is an XPARTCO OE ice maker assembly for GE-manufactured refrigerators. This listing is for the ice maker assembly only — attachments such as fill cups, wire harnesses, and fill tubes are not included. You will reuse the existing attachments from your old ice maker. This ice maker does not replace old-style ice maker models — verify your model number against the parts diagram before ordering.

When a GE refrigerator stops producing ice, the cause is not always the ice maker itself — but when systematic diagnosis rules out the water supply, freezer temperature, and external controls, the ice maker assembly is typically the failed component. This guide walks through the diagnostic path before and after replacement.

Start with the water supply. Close the freezer door and dispense water from the door (if equipped). If the dispenser flow is weak or absent, the problem is upstream of the ice maker — a closed supply valve behind the refrigerator, a kinked supply line, low household water pressure, or a clogged water filter. Replace the filter if it has been in service longer than the manufacturer's recommended interval. If the dispenser flows normally, the supply side is likely clear. Next, check the freezer temperature. The ice maker's internal thermostat will not close — and the harvest cycle will not start — unless the mold temperature drops to its setpoint, which requires the freezer compartment to be at or below 0°F. A freezer running at 10°F or above due to a dirty condenser, a failed fan, or a sealed-system issue will prevent ice production even with a perfectly functional ice maker.

If the water supply and freezer temperature both check out, inspect the shut-off arm (bail arm). This wire lever sits on top of the ice in the bin. When it is in the raised position — whether pushed up by a full bin, stuck from ice bridging, or accidentally bumped during cleaning — it mechanically disengages the timing motor and stops production. Push the arm down and wait 24 hours. If the ice maker still does not cycle after confirming supply, temperature, and arm position, the internal thermostat or timing motor has failed and the assembly needs replacement. This kit includes the complete assembly plus multiple fill cups and wire harnesses to match your specific model configuration.

Quick Answer

How Do You Know the Ice Maker Is the Problem?

If your GE refrigerator has stopped making ice, check three things first: water supply (is the valve open and the filter current?), freezer temperature (is it at or below 0°F?), and the shut-off arm (is it in the down position?). If all three check out and the ice maker still does not start a harvest cycle within 24 hours, the ice maker's internal thermostat or timing motor has failed. At that point, the assembly needs to be replaced as a unit — individual internal components are not sold separately for this electromechanical design. This listing is for the ice maker assembly only — attachments are not included. You will reuse the fill cup, wire harness, and fill tube from your existing ice maker. This ice maker does not replace old-style ice maker models.

Common Symptoms

  • No ice production — harvest cycle never starts despite adequate freezer temperature
  • Ice maker produces only small, hollow, or incomplete cubes
  • Ejector blades rotate continuously without stopping
  • Water overflows from the mold onto the freezer floor
  • Ice maker cycles but does not refill with water after ejection

What Is an OE Part?

An OE (Original Equipment) part is manufactured by the same factory that produces the genuine OEM component. It is the same part — same materials, same tolerances, same production line — shipped in XPARTCO packaging instead of the original manufacturer's box. The only difference is the packaging and the brand name on the label. The part inside is identical to the one you would receive from the original manufacturer's parts channel.

OE parts offer the same fit, function, and reliability as the branded OEM version at a different price point.

Replaces Part Numbers

The WR30X10093 is the current GE part number for this electromechanical ice maker assembly. It supersedes all previous GE, Hotpoint, and RCA ice maker part numbers for this platform.

WR30X10093 replaces WR30X10102, WR29X10080, WR29X5162, SWR29X5121, SWR29X5126, WR29X0191, WR29X20949, WR29X5007, WR29X5012, WR29X5023, WR30M0149, WR30M0153, WR30X0138, WR30X0147, WR30X0148, WR30X0159, WR30X0169, WR30X0199, WR30X0203, WR30X0213, WR30X0214, WR30X0238, WR30X0241, WR30X0259, WR30X0282, WR30X0283, WR30X0289, WR30X0290, WR30X0304, WR30X0306, WR30X0307, WR30X0315, WR30X0318, WR30X0320, WR30X0327, WR30X0328, WR30X0329, WR30X10012, WR30X10014, WR30X10044, WR30X10058, WR30X10061, WR30X10082, WR30X10109, WR30X10139, WR30X148, WR30X27952, WR30X28735, WR30X29421, WR30X320, 162D3868G010, 200D1181G011, AGE28454, AH1993870, AP4345120, EAP1993870, EA1993870, PD00000998, PS1993870

Compatibility & Model Cross Reference

This OE ice maker assembly fits select GE-manufactured refrigerators including side-by-side, top-freezer, and bottom-freezer models. Compatible with over 850 GE refrigerator models. Always verify your specific model number before ordering.

GE: GSS25XGPEWW, GSH25KGPACC, PSC25NSWASS, TFX26KRDAWW, GSS20IEMBCC, GSL22JFTABS

GE Profile: PSS26SGRBSS, PSC23NSWASS

Hotpoint: HSM25IFTFSA, HTS16BCSERWW, HSS25GFPDWW

RCA: Select RCA-branded refrigerator models manufactured by GE

Kenmore (363-prefix): 363.9652711, 363.9761514, 363.9534781, 363.9537881

This is a partial list of verified sample models — not every model from these brands uses this ice maker. Your model number is typically on a sticker inside the refrigerator compartment on the sidewall or ceiling. Not sure if this fits? Send us your model number and we'll confirm compatibility before you order.

Key Features

  • XPARTCO OE ice maker assembly — same part as GE OEM WR30X10093, XPARTCO packaging
  • Ice maker assembly only — attachments (fill cups, wire harnesses, fill tube) not included
  • Reuse the existing attachments from your old ice maker
  • Electromechanical design — thermostat and timing motor driven, no electronic control board
  • 7-cube aluminum mold with curved ejector blades and wire shut-off arm
  • 6-post plug-in connector — direct replacement, no rewiring required
  • Does not replace old-style ice maker models — verify model compatibility before ordering

Product Specifications

Part Number WR30X10093
Condition OE
Brand XPARTCO
Part Type Electromechanical Ice Maker Assembly
Appliance Type Refrigerator (Side-by-Side, Top-Freezer, Bottom-Freezer)
Color White
Dimensions 10-1/8" L × 5-3/8" W × 5-1/4" H
Connector 6-post plug-in
Cubes Per Cycle 7
Includes Ice maker assembly with shut-off arm only — attachments not included, reuse from existing unit

Installation & Safety Notes

Safety Warning
Turn off the water supply to the refrigerator and unplug the unit or switch off the circuit breaker before beginning work. Remove the ice bin, then disconnect the wiring harness from the socket in the freezer wall. Remove the two mounting screws and lift the old ice maker out. Before removing the old unit completely, carefully detach the fill cup, wire harness, and fill tube — you will transfer these attachments to the new ice maker. Mount the new WR30X10093 assembly with the original screws, reconnect the existing wire harness, reinstall your existing fill cup, and route the fill tube. Restore water supply and power. Allow 24 hours for the first batch of ice. Verify the freezer is at or below 0°F and the shut-off arm is in the down position.

Frequently Asked Questions

How do I diagnose whether the ice maker or the water supply is the problem?
Start by checking whether the refrigerator's water dispenser (if equipped) works. Normal dispenser flow means the water supply, the inlet valve, and the filter are all functional — the problem is likely the ice maker itself. If the dispenser flow is weak or absent, the issue is upstream: check the supply valve behind the refrigerator, the water line for kinks, and the filter. If your refrigerator does not have a dispenser, locate the water supply valve behind the unit and confirm it is fully open, then check the filter age. A clogged filter can reduce flow enough to starve the ice maker without fully blocking it.
What freezer temperature does the ice maker need to operate?
The ice maker's internal thermostat closes and starts the harvest cycle when the mold temperature drops to its setpoint — which requires the freezer compartment to hold a consistent temperature at or below 0°F (-18°C). A freezer running at 5°F to 10°F may still keep frozen food firm but can be too warm for the ice maker thermostat to close. Common causes of a warm freezer include a dirty condenser coil (restricting heat exchange), a failed evaporator fan (not circulating cold air), or a faulty defrost system (ice buildup blocking airflow). Correct the freezer temperature first before replacing the ice maker.
Why does the ice maker cycle but produce only small or hollow cubes?
Undersized cubes indicate the mold is not receiving a full water fill. The most common cause is a water filter that is past its service life — it still passes some water, but at reduced flow, so the timed fill cycle ends before the mold is full. Replace the filter and check for improvement. Other causes include a partially clogged water inlet valve (mineral deposits restricting flow) and low household water pressure (the inlet valve requires a minimum pressure — typically 20 psi — to open fully during the fill cycle). The ice maker itself is functioning correctly in this scenario; it is ejecting whatever volume of water was delivered to it.
What does it mean when the ejector blades keep running and do not stop?
Continuous rotation of the ejector blades — where the timing motor never stops at the end of the harvest cycle — usually indicates a failed thermostat inside the ice maker. In normal operation, the thermostat opens at the end of the harvest cycle when the mold temperature rises above a certain point, which de-energizes the motor until the next freeze cycle. If the thermostat is stuck closed, the motor receives continuous power and the blades keep turning. The thermostat is not a serviceable part on this ice maker — the entire assembly must be replaced.
Are attachments included with this ice maker?
No. This listing is for the ice maker assembly only. Fill cups, wire harnesses, and fill tubes are not included. You will reuse the existing attachments from your old ice maker. When you remove the old unit, carefully detach these components and transfer them to the new assembly. These attachments are specific to your refrigerator model and typically do not need replacement when the ice maker itself fails.
XPARTCO OE Part Fast Shipping Easy Installation
View full details
XPARTCO WR30X10093 (OE) Refrigerator Ice Maker  Parts-O-Matic

XPARTCO WR30X10093 (OE) Refrigerator Ice Maker

List Price:  $138.90
$98.50
 per 
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!