XPARTCO WH23X29553 Washer Water Valve
- Sku:
- XPWH23X29553
- Vendor:
- XPARTCO
Have a question?
XPARTCO WH23X29553 Washer Water Valve
XPARTCO WH23X29553 Washer Water Valve
The XPARTCO WH23X29553 is an aftermarket replacement water inlet valve for GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café models. This valve controls the flow of water into the washer from the household supply line — when the control calls for a fill, the valve's solenoid opens to admit water, and closes again once the correct level is reached. Built with an ABS plastic body and stainless steel components for durability against corrosion.
Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve typically shows up as the washer not filling properly, filling too slowly, or leaking water. It directly replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA. As an aftermarket replacement, the WH23X29553 is built to OEM-equivalent quality standards.
Quick Answer
The XPARTCO WH23X29553 Washer Water Valve fixes GE front-load washers (and select Hotpoint, RCA, Haier, Monogram, and Café models) that aren't filling properly, are filling too slowly, or are leaking water near the valve connections. Replaces AP6983554, PS12743643, EAP12743643, 33090202, 0024000126GA. Not the same part as the similarly-numbered WH23X29538 valve — confirm you have the correct number before ordering.
Common Problems This Part Fixes
- Washer not filling with water, or filling only partially
- Washer fills much more slowly than it used to
- Water leaking near the valve connections
- Cycle stalling at the fill step and never advancing to wash
- No hot water reaching the tub, or no cold water reaching the tub
- Washer not washing properly due to insufficient or incorrect-temperature water
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as:
- GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN
- GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, GFW650SSN3WW, GFW650SSN4WW
- GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS
- GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW
- GFW655SSV0WW
- PFW870SPV0RS
- PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS
Note — not the same as WH23X29538: A similarly-numbered valve, WH23X29538, is a separate part (replaces 4977241, AP6990115, PS16217225, EAP16217225, 33090201, 0024000126GB) used on related but distinct models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure.
Key Features
- Aftermarket replacement built to match GE's factory-specified solenoid design and flow rate
- ABS plastic body with stainless steel components for corrosion resistance
- Resolves "won't fill," "fills slowly," and "leaking near the valve" symptoms caused by valve failure
- Direct drop-in replacement — matches the original mounting and hose connections
- Replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA
- Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers
- Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
| Part Number | XPWH23X29553 |
| Part Type | Washer Water Inlet Valve |
| OEM Part Number | WH23X29553 |
| Condition | Aftermarket Replacement |
| Brand | GE |
| Application | Front-Load Washers |
| Body Material | ABS plastic |
| Component Material | Stainless steel |
| Quantity | 1 valve |
| Compatible Brands | GE, Hotpoint, RCA, Haier, Monogram, Café |
Installation Notes
Frequently Asked Questions
How do I remove the front control panel without breaking it?
Avoid pulling the panel straight out with heavy force — the slotted tabs on the right side of the panel can snap if you pull too far. Instead, pull the panel gently forward first, then slide it to the right to release it from its mounting. This gentler approach avoids the most common way this panel gets damaged during a valve repair.
I've heard this valve sometimes needs replacing again after just a couple of years. Is that normal?
Some owners have reported needing to replace this valve again within a relatively short time, even after a successful repair. While most installations hold up well long-term, if you experience a repeat failure, it's worth double-checking your household water pressure and mineral content, since hard water and high pressure can accelerate wear on any water valve regardless of brand.
Is this the same as WH23X29538? The numbers look almost identical.
No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close match, since ordering the wrong one means it won't fit correctly.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, flow rate, and connection type of the original WH23X29553 valve used in compatible GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.