Skip to product information
Sale
  • Sku: XPWH08X37938

XPARTCO WH08X37938 Washer Lid Switch Assembly

List Price:  $67.00
$37.20
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

XPARTCO WH08X37938 Washer Lid Switch Assembly

This XPARTCO WH08X37938 is an aftermarket lid switch (lid lock) assembly for GE and Hotpoint top-load washers, and it is also used on select Kenmore models. It locks the lid while the washer runs, releases it when the cycle ends, and signals the control board that the lid is closed and it is safe to operate. If it wears out, cracks, or fails electrically, the washer may not start, may stop mid-cycle, may show a lid or door lock error, or may not lock the lid at all.

The assembly swaps in for the original lock and switch as a single unit, so there is no need to work out which internal contact failed. It mounts on the washer cabinet with an electrical connector, and the repair is straightforward, usually finished in under an hour.

Quick Answer

Choose the XPARTCO WH08X37938 Lid Switch Assembly when a GE or Hotpoint top-load washer won't start, stops mid-cycle, won't lock the lid, or shows a lid or door lock error because the lid lock is worn or has failed. Complete replacement lock and switch assembly, aftermarket. Classic symptom: you close the lid and nothing happens, or the washer starts then stops and signals a lid or lock fault.

Common Problems This Part Fixes

  • Washer won't start when the lid is closed
  • Washer stops partway through the wash, rinse, or spin
  • Lid will not lock, or stays locked after the cycle ends
  • Lid or door lock error codes
  • Loose, cracked, or visibly damaged lid lock

Cross Reference Information

Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.

Replaces Part Numbers

This lid switch assembly replaces the following part numbers:

WH08X37938, WH08X32697, WH02X24399, WH08X32657, WH01X26694, WH01X24112, WH01X24114, WH01X26114, WH01X27954, WH08X31577, WH08X31222, 290D1580P001, 290D1580P002, 290D1580P003, 290D1580P004, 290D3070P001, EG-380843 M, AGE26076, AP7225583, EAP17626546, PD00087323, PS17626546

These are earlier GE numbers for the lid lock, as the part was updated over time. If your old lock or parts diagram shows any of them, match against this list.

Compatibility

This assembly is listed for select top-load washers from:

  • GE and Hotpoint, including GTUN275EM0WW, GTUN275GM0WW, GTUP240EM0WW, and GTUP240EM2WW
  • Kenmore, including 363.71542211, 363.71542310, and 363.71542410

Note: The model list above is only a sample, and lid locks differ between GE washer generations. Confirm fit by matching the number on your old lock or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. This part is for top-load washers.

Key Features

  • Aftermarket replacement lid switch (lid lock) assembly
  • Replaces the lock and switch as a unit, with no need to find the failed contact
  • Restores starting, locking, and unlocking at the end of the cycle
  • Cross-references to WH08X32697, WH08X31577, and other earlier GE numbers
  • Fits select GE, Hotpoint, and Kenmore top-load washers
  • Mounts on the cabinet with a plug-in electrical connector

Product Specifications

Part Number XPWH08X37938
OEM Part Number WH08X37938
Part Type Washer Lid Switch (Lid Lock) Assembly
Condition Aftermarket Replacement
Application Select GE, Hotpoint & Kenmore Top-Load Washers

Installation Notes

⚠️ Unplug Power and Shut Off Water Unplug the washer and turn off the water supply before starting. Work gloves are recommended. Open the lid and, following your model's service guide, remove the top panel or cabinet section to reach the lid lock mounted on the cabinet. Note the position of the old assembly, disconnect its wiring connector, and remove the screws holding it in place. Fit the new assembly in the same position, secure it, and reconnect the connector. Reassemble the washer, restore power and water, and run a short cycle to confirm the lid locks, the washer starts, and the lid releases at the end.

Frequently Asked Questions

My washer won't start with the lid closed. Is this the part I need?

It could be. A failed lid lock is a common reason a washer won't start, since the control board won't begin a cycle until it senses the lid is closed and locked. First make sure the lid closes fully and nothing is in the way. If the washer still won't start, the lid lock is a likely culprit.

Is a lid switch the same as a lid lock?

On these washers, the lid switch and lock are combined in one assembly, which this part replaces.

My old part is marked WH08X32697 or WH08X31577. Will this work?

Those numbers are on the Replaces list. Compare the connector and mounting against your old part, or contact our support team with your model number and we'll confirm.

Will this fit my front-load washer?

No. This is for top-load washers.

Is this an OEM part?

No. This is an XPARTCO aftermarket replacement built to match the GE WH08X37938. If you prefer a genuine OEM assembly, contact us.

Shop With Confidence

Express Parts Direct is a U.S.-based appliance parts retailer offering genuine OEM and high-quality replacement parts for all major brands, with fast shipping from our U.S. warehouse. Our team can help verify compatibility before you buy.

✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
View full details
XPARTCO WH08X37938 Washer Lid Switch Assembly

XPARTCO WH08X37938 Washer Lid Switch Assembly

List Price:  $67.00
$37.20
 per 
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!