XPARTCO WH01X20826 Washing Machine Shock Absorber
- Sku:
- XPWH01X20826
- Vendor:
- XPARTCO
Have a question?
XPARTCO WH01X20826 Washing Machine Shock Absorber
XPARTCO WH01X20826 Washing Machine Shock Absorber
The XPARTCO WH01X20826 is an aftermarket replacement shock absorber (damper) for GE front-load washers. The wash tub inside a front-load washer hangs suspended inside the cabinet, and a set of these shock absorbers is what controls that movement — dampening the tub's vibration and motion during spin so it doesn't bang against the cabinet or shake the whole machine. These washers typically use four shock absorbers working together around the tub, and this listing is for a single individual shock absorber.
Over time the internal damping material in these shocks wears out, or the shock can physically separate from its mounting point — something that can also happen if the washer is moved or shifted without the tub properly secured first. Because all four shocks on a given washer are typically the same age and under the same stress, if one has failed the others are often not far behind — many technicians recommend ordering four of this same part and replacing the full set together as a preventative measure. A worn or detached shock absorber produces a very recognizable symptom: excessive vibration, shaking, or banging noise during the spin cycle, sometimes strong enough that the washer visibly moves or "walks" across the floor. It directly replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
Quick Answer
The XPARTCO WH01X20826 Washing Machine Shock Absorber fixes GE front-load washers (and select Hotpoint, Haier, Monogram, Café, and Kenmore models built on the GE platform) that vibrate, shake, or bang excessively during spin, or seem to "walk" across the floor. Sold as a single individual shock absorber. Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130. These washers use four shock absorbers total — if one has failed, order four of this part to replace the full set, since they wear on the same schedule.
Common Problems This Part Fixes
- Excessive vibration or shaking during the spin cycle
- Loud banging or knocking noise from inside the cabinet during spin
- Washer that seems to "walk" or move across the floor during operation
- Tub striking the cabinet frame or nearby panels
- Shock absorber that has visibly separated or detached from its mounting point
- Noise or vibration that started or worsened after the washer was moved or relocated
- Visible wear, cracking, or looseness in the shock absorber material
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washing machine shock absorber directly replaces the following OEM and cross-reference part numbers:
WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This shock absorber is compatible with select GE front-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: GE uses several different shock absorber part numbers across its washer lineup, including separate parts such as WH01X10727 and WH03X29516 for other platforms. This WH01X20826 shock is specific to the front-load models listed above and is not interchangeable with those other GE shocks. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
- Aftermarket replacement shock absorber — dampens tub vibration and movement during spin
- Sold individually — order four to replace the full set on a typical front-load washer
- Resolves "excessive vibration," "banging or knocking noise," and "washer walking across the floor" symptoms caused by worn or detached shocks
- Durable plastic and rubber construction for long-term damping performance
- Direct drop-in replacement — no modification required
- Replaces WH01X20826, AGE25988, AP5982139, AGE25988, EAP11701130, PD00037528, PS11701130.
- Compatible with GE, Hotpoint, Haier, Monogram, Café, and select Kenmore front-load washers
- Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
| Part Number | XPWH01X20826 |
| OEM Part Number | WH01X20826 |
| Part Type | Washing Machine Shock Absorber (Damper) |
| Condition | Aftermarket Replacement |
| Application | GE Front-Load Washers |
| Material | Plastic and rubber |
| Function | Dampens tub vibration and movement during spin |
| Typical Quantity Per Washer | 4 (this listing is for 1 individual shock) |
| Quantity | 1 shock absorber |
| Compatible Brands | GE, Hotpoint, Haier, Monogram, Café, Kenmore |
Installation Notes
Frequently Asked Questions
Do I need to order more than one of these?
This listing is for a single shock absorber, but GE front-load washers use four of them working together around the tub. If one has failed, it's strongly worth ordering four total and replacing the full set, since all four are typically the same age and have been under the same stress — replacing just one risks having to reopen the washer again soon after for the next one.
My washer started shaking right after I moved it to a new spot. Is that related?
Yes, this is a documented cause of shock absorber problems on this platform. If the tub wasn't properly secured or the washer was tilted significantly during a move, one or more shock absorbers can separate from their mounting point. Check that all four shocks are still properly connected at both ends before assuming a shock itself has failed — sometimes reseating a separated shock is all that's needed, though if it shows wear it's worth replacing regardless.
How much vibration is normal, and how do I know it's actually the shocks?
Some vibration during high-speed spin is normal, especially with an unbalanced load. But vibration strong enough to move the washer across the floor, or accompanied by a banging or knocking noise from inside the cabinet, points to a suspension problem rather than a simple unbalanced load. Try redistributing the laundry evenly in the drum and running the spin cycle again — if the shaking persists with a balanced load, inspect the shock absorbers for wear, cracking, or separation.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, mounting configuration, and damping performance of the original WH01X20826 shock absorber used in compatible GE, Hotpoint, Haier, Monogram, Café, and Kenmore front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.