• Home
  • XPARTCO WB24X47186 Surface Element Infinite Switch
  •
Sale
  • Sku: XPWB24X47186

XPARTCO WB24X47186 Surface Element Infinite Switch

$49.50
$39.94
Shipping calculated at checkout.
Just 2 left. Order soon!

BEST PRICE
We back all products with a 1 year guarantee.

FREE SHIPPING
No code needed, just head for checkout!

This is a demonstration store. You can't purchase this product.

Guaranteed safe checkout

Product description

WB24X47186 Surface Element Infinite Switch — XPARTCO OE Replacement for GE Electric Ranges

The WB24X47186 is an OE infinite switch distributed by XPARTCO, designed to replace the original GE WB24X47186 and its predecessor WB24X25013. Before replacing a switch, it helps to confirm the diagnosis. An infinite switch failure produces predictable electrical symptoms that are easy to distinguish from a bad element or a wiring problem. A quick multimeter test across the switch terminals will show whether the contacts are stuck closed, stuck open, or cycling correctly — saving you the cost of replacing the wrong component.

The key diagnostic clue is the relationship between the knob position and the element behavior. If the element stays at full heat regardless of where the knob is set, the switch contacts have likely welded shut internally. If the element gets no power at all and the element's own continuity checks out fine, the switch contacts have failed open. Erratic behavior — heat that cuts in and out — points to a degraded bimetallic strip that flexes inconsistently. In all three cases, the WB24X47186 restores proper heat regulation.

Will This Fix My Range?
Yes — if your GE, Hotpoint, or RCA electric range has a burner stuck on high, not heating, or producing uneven heat output, a faulty infinite switch is the most likely cause. The WB24X47186 replaces the original switch and restores full variable temperature control from simmer to high on the affected burner.

Common Symptoms of a Failed Infinite Switch

  • Burner locked on high heat — element glows red on any knob setting
  • No heat from the burner even though the element tests good with a multimeter
  • Heat output fluctuates erratically during cooking
  • Control knob feels different — no tactile click or increased resistance
  • Burning or overheating smell near the control panel area
  • Burner works on high but not on low or medium settings

What Is an OE Part?

OE stands for Original Equipment. An OE part comes from the same manufacturer that builds the original component for GE — same production line, same materials, same engineering tolerances. The only difference is distribution: instead of shipping in GE's branded retail packaging, this switch is packaged and distributed by XPARTCO. The result is an identical part at a lower price point, because it bypasses the appliance brand's retail markup while maintaining the same factory specifications.

Cross Reference Information

The WB24X47186 directly replaces the following original and distributor part numbers. If your failed switch carries any of these numbers on its label, this XPARTCO OE replacement is the correct fit.

WB24X47186, WB24X25013, 191D4774P005, 4464832, MDSA-W767-GEM, AGE1543754, AP7216136, EAP11729102, PS11729102, PS17872685

Compatibility

This XPARTCO OE WB24X47186 infinite switch is compatible with the following GE electric range models:

GE: JB700DJ2BB, JB700DJ2WW, JB860DJ1BB, JB860DJ1WW, JB860DJ2BB, PCB980SJ2SS, PCB980SJ3SS, PCB980SJ4SS

Also fits select Hotpoint, RCA, and Kenmore electric ranges originally equipped with the WB24X47186 or WB24X25013 switch. Always confirm your model number before ordering.

Key Features

  • OE replacement for GE infinite switches WB24X47186 and WB24X25013 — same manufacturer, XPARTCO packaging
  • Designed for 240V electric range circuits with standard surface elements
  • Internal bimetallic strip provides smooth, continuously variable heat control
  • Matches original mounting pattern and terminal configuration for direct installation
  • Compatible across GE, Hotpoint, RCA, and select Kenmore electric ranges
  • Eliminates stuck-on-high, no-heat, and erratic-heat symptoms caused by switch failure

Specifications

Part Number WB24X47186
OEM Part Number WB24X47186
Condition OE
Brand XPARTCO
Replaces WB24X25013
Part Type Surface Element Infinite Switch
Appliance Type Electric Range
Compatible Brands GE, Hotpoint, RCA, Kenmore
Voltage 240V
Estimated Install Time 15–30 Minutes
Safety Warning

Always unplug the range or shut off the dedicated 240V breaker before accessing the control panel. Electric ranges carry voltages high enough to cause serious injury or death. Never attempt to test or replace an infinite switch with the range connected to power. If you are unsure about any step of the repair, consult a licensed appliance repair technician.

Frequently Asked Questions

How do I test an infinite switch with a multimeter?
Disconnect the range from power first. Remove the wires from the switch terminals and label them for reassembly. Set your multimeter to continuity or the lowest ohm setting. With the switch knob in the off position, you should read no continuity (open circuit) across the L1 and H1 terminals. Turn the knob to any on position — you should now read continuity or very low resistance. If you get continuity in the off position, the contacts are welded shut. If you get no continuity in any on position, the contacts have failed open. Either result means the switch needs to be replaced.
Can a bad infinite switch damage the surface element?
A switch stuck on high delivers continuous, unregulated power to the element, which shortens the element's lifespan by keeping it at maximum temperature without the normal cycling intervals. Over time, this accelerates coil oxidation and can lead to hot spots or a burned-out element. If your switch has been stuck on high for an extended period, inspect the element for visible damage — discoloration, blistering, or breaks in the coil — before installing the new switch.
My element only heats on high — is it the switch or the element?
If the element works on high but produces no heat or very little heat at lower settings, the problem is almost certainly the infinite switch, not the element. The element itself is either on or off — it doesn't regulate its own output. The infinite switch is the component responsible for cycling power to create lower heat levels. An element that heats on high confirms the element and its wiring are intact. Replace the switch.
What is the difference between WB24X47186 and WB24X25013?
WB24X25013 is the original GE part number that was superseded by WB24X47186. They are functionally the same switch — GE updated the part number when the replacement was revised in manufacturing. If your range's parts diagram shows either number, this WB24X47186 is the correct OE replacement. The XPARTCO OE switch replaces both numbers with identical fit and function.
Is an OE part the same quality as a genuine OEM part?
Yes. An OE part is made by the same manufacturer that produces the original component for GE, using the same specifications, materials, and production standards. The only difference is how it reaches you — this switch ships in XPARTCO packaging instead of GE's branded retail box. Functionally and in terms of build quality, it is the same switch that would come in a GE-branded package.
XPARTCO OE Part Fast Shipping In Stock 15–30 Min Install
View full details
XPARTCO WB24X47186 Surface Element Infinite Switch

XPARTCO WB24X47186 Surface Element Infinite Switch

$49.50
$39.94
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!