XPARTCO W11688994 Washer Water Valve (Hot)

XPARTCO W11688994 Washer Water Valve (Hot) – Compatible with Whirlpool & Maytag Washers

Product Description

Restore proper water fill performance and reliable washing cycles with the XPARTCO W11688994 Washer Water Valve. This high-quality replacement controls the flow of hot water into the washer during fill cycles.

This Water Inlet Valve is a replacement part for specific Whirlpool washing machine models. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. Common causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and function.

Replaces Part Numbers

W11688994, W11316255, W11036928, W11486360, 4983330, PD00085626, OEM21655815, EAP17216729, FIX17216729, AP7218602, PS17216729. 

Compatibility

This replacement washer water inlet valve fits select Whirlpool, Maytag, Amana, and Kenmore (Whirlpool-manufactured) washers.

Common compatible models include (but are not limited to):

• Whirlpool WTW5057LW

• Maytag MVW4505MW

Always verify your washer’s model number before ordering.
Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Matches OEM fit and water flow performance

• 💧 Accurate Water Control – Restores proper hot water fill

• ⚙️ Fixes Common Fill Issues – Resolves no-fill, slow-fill, or overfill problems

• 💪 Durable Solenoid Construction – Designed for reliable long-term use

• 💰 Cost-Effective Repair – Affordable alternative to OEM water valves

📐 Product Specification

• Part Number: XPW11688994

• Component Type: Washer Water Inlet Valve

• Voltage: 120V AC

• Water Ports: Hot inlet (model dependent)

• Mounting: Direct-fit, screw-mounted

• Application: Washer fill system

• Quality Level: Aftermarket replacement (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, pliers

⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.

Basic Steps:

1. Disconnect washer power and turn off water supply.

2. Remove the rear access panel to reach the inlet valve.

3. Disconnect water hoses and electrical connectors.

4. Remove mounting screws and remove the old valve.

5. Install the new XPARTCO W11688994 water valve.

6. Reconnect hoses and wiring, reassemble panels, and restore power.

7. Run a test cycle to check for proper filling and leaks.

⏱️ Time Required: 20–30 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Aftermarket Appliance Parts

• 🔄 30-Day Return Policy

Restore proper washer filling and dependable performance — Add to Cart Now for a reliable, budget-friendly repair!