• Home
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
  • XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic
Sale
  • Sku: XPDC97-16350ST

XPARTCO DC97-16350ST Washer Suspension Rod Kit

$77.50
$68.40
Shipping calculated at checkout.
In stock!

BEST PRICE
We back all products with a 1 year guarantee.

FREE SHIPPING
No code needed, just head for checkout!

This is a demonstration store. You can't purchase this product.

Guaranteed safe checkout

Product description

XPARTCO DC97-16350ST Washer Suspension Rod Kit (Set of 4)

When a Samsung top-load washer starts vibrating violently, walking across the laundry room floor, or flashing a UE error code and stopping mid-spin, the problem is almost always the suspension rods. These four rods hold the wash tub in position — and once their springs lose tension or their rubber mounting bushings crack, the tub swings freely and the washer cannot balance itself during high-speed spin. The symptoms build gradually: what starts as a slight shake eventually becomes a washer that sounds like it is tearing itself apart.

The XPARTCO DC97-16350ST kit solves this with a complete matched replacement set. It includes two DC97-16350S rods for the rear positions (identifiable by white springs) and two DC97-16350T rods for the front positions (identifiable by pink springs). Samsung designed these two rod types with different spring rates because the front and rear tub mounting points handle different load angles during spin — so simply buying four of the same rod would not produce a balanced result. This kit pairs the correct rods together for a single, complete repair.

Quick Answer

Will This Fix My Washer? Yes — if your Samsung top-load washer shakes, walks, bangs during spin, or displays a UE/UB error, worn suspension rods are the most likely cause. This XPARTCO DC97-16350ST kit gives you all 4 rods in one box — 2 rear (white/S-type) and 2 front (pink/T-type). Quick test: open the top panel, push the inner tub sideways — if it swings freely without springing back, the rods are shot.

Common Symptoms of Worn Suspension Rods

  • Washer shakes violently or rocks during spin cycle
  • Washer walks or slides across the floor
  • Loud rhythmic banging or thumping during high-speed spin
  • UE, UB, or dC error code appears on the display
  • Spin cycle stops prematurely — washer keeps retrying and failing to balance
  • Tub hangs unevenly or tilts to one side when washer is idle

Cross Reference Information

The DC97-16350S (rear) and DC97-16350T (front) rods appear under many catalog numbers across distributors. This kit replaces all of the following:

XPDC97-16350ST, DC97-16350S, DC97-16350T, AP6806420, AP6806421, ASM105145, ASM143652, EAP12708544, EAP12592527, PD00070381, PD00069414, PS12708544, PS12592527

Compatibility

Fits select Samsung top-load washers, including:

  • WA50R5200AW, WA50R5200AV, WA50R5400AV, WA50R5400AW
  • WA45T3200AW, WA45T3400AV, WA45T3400AW
  • WA45N3050AW, WA45H7000AW, WA45M7050AW
  • WA44A3205AW, WA44A3405AP, WA44A3405AV, WA44A3405AW
  • WA41A3000AW, WA40A3005AW, WA50T5300AC

Note: This list does not cover every compatible model. Samsung uses DC97-16350S and DC97-16350T rods across a wide range of WA-series top-loaders. Check your model's parts diagram or contact us to confirm before ordering.

Key Features

  • Complete kit — 2x DC97-16350S (rear position, white spring) and 2x DC97-16350T (front position, pink spring)
  • XPARTCO aftermarket quality — built to match Samsung OEM rod dimensions and spring tension
  • High-grade stainless steel construction with rubber dampers and durable plastic end caps
  • 26.4" overall rod length with 1-3/8" diameter — factory-spec fit
  • Eliminates excessive spin-cycle vibration, tub swing, and noise
  • All four rods in one kit — no need to source S and T rods separately

Product Specifications

Part Number XPDC97-16350ST
OEM Part Number DC97-16350S / DC97-16350T
Part Type Washer Suspension Rod Kit
Kit Contents Set of 4 (2x S-type rear + 2x T-type front)
Condition Aftermarket
Brand XPARTCO
Material High-grade stainless steel with rubber dampers
Overall Length 26.4" per rod
Rod Diameter 1-3/8"
Compatible Brand Samsung
Safety & Installation Disconnect power before starting. The washer must be tilted back, so lean it against a wall or have someone hold it. Remove the two screws at the rear of the top panel and slide it off to access the suspension rods. Each rod hooks onto the tub bracket at the top and snaps into the base frame at the bottom. Unclip any wiring or hoses attached to the old rods before removing them and transfer them to the new rods. Install the white-spring S-type rods at the two rear positions and the pink-spring T-type rods at the two front positions — match them to the color of the rods you removed. After replacing all four rods, reassemble the top panel, plug in the washer, and run an empty spin cycle to verify stable operation. Estimated time: 30–45 minutes with basic hand tools.

Frequently Asked Questions

How do I know it's the suspension rods and not something else causing vibration?
The fastest way to tell is a hands-on check: open the top panel and push the inner tub side to side. Good rods hold the tub fairly firm and pull it back to center — worn rods let it swing freely. If the rods look fine but you still have vibration, check the leveling feet (all four should contact the floor solidly), the damper pads on the base frame, and the spider arm assembly beneath the wash plate for cracks.
What is the difference between the S-type and T-type rods in this kit?
Both are the same overall length (26.4") and diameter (1-3/8"), but they have different spring rates. The S-type rods (white springs) are calibrated for the rear mounting positions and the T-type rods (pink springs) are calibrated for the front. Samsung uses two types because the front and rear positions carry different directional loads when the tub spins at high speed. The spring color makes it easy to tell them apart during installation.
My washer throws a UE code but the load is balanced — could it still be the rods?
Yes. The UE (unbalanced) error is triggered when the washer's control board detects excessive tub movement during spin. Even with a perfectly balanced load, worn suspension rods allow too much tub swing, which trips the sensor. If you consistently get UE codes with loads of all sizes, worn rods are the most likely cause — the board is reading the tub movement as an unbalanced condition because the rods are no longer dampening it properly.
Is this an OEM Samsung part or an aftermarket replacement?
This is an XPARTCO aftermarket replacement kit. It is manufactured to match Samsung OEM specifications for dimensions, spring tension, and material quality. The key advantage of this kit is the price and convenience — you get all four rods (both S-type and T-type) in a single matched set at a fraction of the cost of ordering four individual OEM rods.
Can I use these rods in a Samsung front-load washer?
No. Samsung front-load washers use shock absorbers (dampers), not suspension rods. Suspension rods are specific to Samsung top-load washers where the tub hangs from above. If you have a front-loader with vibration issues, you need shock absorbers — a completely different part. Check your model number to confirm you have a top-load washer before ordering.
XPARTCO Aftermarket Part Fast Shipping In Stock 30–45 Min Install
View full details
XPARTCO DC97-16350ST Washer Suspension Rod Kit  Parts-O-Matic

XPARTCO DC97-16350ST Washer Suspension Rod Kit

$77.50
$68.40

Model Compatibility

Search your appliance model number below. Supports partial or full model search.

🔍 Search Model Number

Type your full or partial model number above to instantly check if this part fits your appliance.

✓ Guaranteed Fit — exact model match found.
No matching model found. Please verify your full model number or contact support.
Loading compatible models...
Model Number Manufacturer Appliance Type

⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.

SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!