- Sku: XP6500JB2001B
XPARTCO 6500JB2001B Refrigerator Temperature Sensor
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
XP6500JB2001B Refrigerator Temperature Sensor — XPARTCO Aftermarket Replacement
The XP6500JB2001B is an XPARTCO aftermarket temperature sensor that replaces the LG 6500JB2001B thermistor in LG and Kenmore refrigerators. Before replacing this component, a few targeted tests can confirm whether the thermistor has actually failed or whether the temperature problem originates elsewhere — in the evaporator fan, condenser coils, a sealed-system leak, or the control board itself. The thermistor is the cheapest and easiest of these to test, so it is the logical starting point.
Testing is straightforward. The sensor is an NTC thermistor — a resistor whose value changes predictably with temperature. At room temperature (approximately 77°F / 25°C), a good thermistor reads roughly 5,000 ohms. At refrigerator temperature (approximately 37°F / 3°C), resistance climbs to roughly 16,000 ohms. An open reading (OL) at any temperature, or a reading that does not change when warmed or cooled, confirms the thermistor has failed. The XP6500JB2001B is the correct aftermarket replacement.
Will This Fix Your Refrigerator?
If your LG or Kenmore refrigerator runs too warm, too cold, or continuously without cycling off, the thermistor is the most common and most testable cause. Set a multimeter to ohms and check resistance across the sensor leads — compare the reading to the expected value for the current compartment temperature. If the reading is open (OL), stuck at one value, or far outside the expected range, the thermistor has failed and the XP6500JB2001B is the fix.
Common Symptoms
- Refrigerator compartment too warm — food spoils prematurely
- Refrigerator compartment too cold — items freeze on shelves
- Compressor runs nonstop without cycling off
- Compressor does not start at all
- Temperature swings between too warm and too cold
- Temperature-related error code on the display panel
Cross Reference Information
The XP6500JB2001B is an aftermarket replacement for the following OEM and distributor catalog numbers. If any of these numbers appear on your existing sensor or in a parts lookup, this XPARTCO sensor is the correct replacement.
This aftermarket sensor fits the same LG and Kenmore refrigerator models as the original 6500JB2001B, which is listed for over 1,400 models. Confirm your model number before ordering.
Sample compatible models: LFX25960ST, LFX25961SB, LFX25976ST, LMXS30776S, LMX25964ST, 79551012010, 79574015410, 79578543804, LFXS26973S, LFX31925ST
Key Features
- XPARTCO aftermarket replacement for LG 6500JB2001B thermistor
- NTC thermistor — matches OEM resistance-temperature curve
- Same connector type and lead wire length as original — direct plug-in
- Fits LG and Kenmore refrigerators across multiple model families
- Supersedes 6500JB1003G, 6500JB1005J, 6500JB2001X, and 6500JK1003A
- Quick installation — typically 15 to 30 minutes, no special tools
Specifications
| Part Number | XP6500JB2001B |
| OEM Part Number | 6500JB2001B |
| Condition | Aftermarket |
| Brand | XPARTCO |
| Part Type | Temperature Sensor (Thermistor) |
| Appliance Type | Refrigerator |
| Sensor Type | NTC Thermistor |
| Compatible Brands | LG, Kenmore |
Unplug the refrigerator from the wall outlet before testing or replacing the temperature sensor. The thermistor operates at low voltage, but disconnecting power protects the control board electronics from short circuits during the swap. After installation, allow the refrigerator 24 hours to stabilize at the set temperature before making adjustments.
Frequently Asked Questions
Have a question?

XPARTCO 6500JB2001B Refrigerator Temperature Sensor

