XPARTCO 35001193 Dryer Thermal Cut Off Replaces WP35001193

XPARTCO 35001193 Dryer Thermal Cut Off – Replaces WP35001193 – Compatible with Whirlpool, Maytag & Kenmore Dryers

Product Description

Protect your dryer from overheating with the XPARTCO 35001193 Dryer Thermal Cut Off. This high-quality replacement safety device is designed to permanently shut off power to the heating circuit if excessive temperatures are detected. A blown thermal cut off can cause the dryer to stop heating or shut down completely. Replacing it with this reliable XPARTCO component restores safe operation and helps prevent damage to critical dryer parts.

Thermal fuse with bracket. The fuse is not resettable and will need to be replaced if blown. If the dryer does not heat, the thermal fuse may be blown.

Replaces Part Numbers

WP35001193, 35001193, 1185515, PD00003365, EAP11741829, AP6008689, PS11741829.

Compatibility

This replacement dryer thermal cut off fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Estate electric dryers.

Example compatible models include (but are not limited to):
Whirlpool WED4815EW1, Maytag MEDC215EW1, Kenmore 110.65132411.

Always verify your dryer’s model number before ordering.
Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Matches OEM safety cutoff performance

• 🔥 Overheat Protection – Permanently opens the heating circuit at unsafe temperatures

• 🛡️ Critical Safety Component – Helps prevent dryer overheating and component damage

• 💰 Cost-Effective Repair – Reliable alternative to OEM pricing

• 🛠️ Direct-Fit Installation – Mounts easily on heater housing

📐 Product Specification

• Part Number: 35001193

• Component Type: Dryer Thermal Cut Off

• Function: One-time safety cutoff device

• Material: Heat-resistant metal body

• Mounting: Screw-mounted on heater assembly

• Compliance: Built to OEM-equivalent quality standards (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver

⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.

Steps:

1. Disconnect dryer power and remove the rear access panel.

2. Locate the thermal cut off on the heater housing.

3. Disconnect wiring and remove the old cut off.

4. Install the new XPARTCO 35001193 thermal cut off.

5. Reconnect wiring, reinstall panel, and restore power.

6. Test dryer operation.

⏱️ Time Required: 10–15 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Appliance Parts Supplier

• 🔄 30-Day Return Policy

Restore dryer safety and proper heating — Add to Cart Now for a dependable, budget-friendly repair!