Skip to product information
Sale
  • Sku: WH16X27181

WH16X27181 Washer Genuine Suspension Rod Assembly

List Price:  $38.00
$29.50
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

WH16X27181 Washer Suspension Rod Assembly (24-Inch) — Genuine OEM

Product Description

The most common ordering mistake for GE laundry center suspension rods is buying all of one part number when the machine actually requires two different numbers. GE's GUD24 unitized laundry centers use four suspension rods total, but they are not all the same part. The rods mount in position-specific pairs — typically two WH16X27181 and two WH16X27182 — with each part number assigned to specific bracket locations on the cabinet frame. Ordering four of the WH16X27181 without checking the parts diagram means two of them will not match the bracket geometry they are installed in.

The parts diagram for your model is the only reliable way to determine how many of each rod you need and which positions they go in. Look up your model number on the GE Appliances parts site or a third-party parts database and find the suspension rod section. Each rod position will be labeled with its part number. Count how many positions call for the WH16X27181 and how many call for the WH16X27182, then order that exact quantity of each. The rods are sold individually, so you can order the precise combination your machine requires.

Quick Answer

Do You Need This Rod, the Other One, or Both?

If your GE unitized laundry center is shaking, banging during spin, or the tub sits off-center, worn suspension rods are a common cause. But before you order, check your model's parts diagram — GUD24-platform laundry centers use two different rod part numbers (WH16X27181 and WH16X27182) in different mounting positions. The diagram shows exactly which positions take which rod and how many of each. If you're replacing all rods — which most technicians recommend — you'll need a specific quantity of each number, not four of the same. Send us your model number if you're unsure and we'll confirm exactly what you need.

Common Symptoms

  • Excessive vibration or shaking during the wash or spin cycle
  • Loud banging, thumping, or knocking sounds from inside the cabinet
  • Laundry center walks or shifts across the floor during operation
  • Washer tub visibly off-center or tilted when the lid is open
  • Vibration that has gradually worsened over time with loads the machine previously handled

Replaces Part Numbers

The WH16X27181 is the current GE part number for this 24-inch washer suspension rod assembly. It replaces the following part and catalog numbers.

WH16X27181 replaces 4588127, AGE26968, AP6328300, EAP12343388, PD00062747, PS12343388

Compatibility & Model Cross Reference

This genuine OEM suspension rod fits select GE-manufactured unitized laundry centers (stacked washer/dryer combos). Always confirm your specific model number and the parts diagram rod positions before ordering.

GE (General Electric): GUD24ESSM0WW, GUD24ESSM1WW, GUD24GSSM0WW, GUD24GSSM1WW

Hotpoint / RCA / Kenmore: Select unitized laundry center models using the same 24-inch rod platform

This is a partial list of verified sample models — not every model from these brands uses this rod. GE laundry centers use different rod lengths depending on the platform, and the GUD24 platform uses two different rod part numbers for different mounting positions. Always confirm your full model number and check the parts diagram before ordering. Not sure which rods you need? Send us your model number and we'll tell you the exact quantity of each part number required.

Key Features

  • Genuine OEM GE suspension rod assembly — 24 inches long
  • Steel shaft with spring damper and ball joints at each end
  • Position-specific — designed for designated bracket locations on the GUD24 platform
  • Companion rod to WH16X27182 — same machine uses both numbers in different positions
  • Designed for GE unitized laundry centers (stacked washer/dryer combos)
  • Sold individually — order the exact quantity shown in your model's parts diagram

Product Specifications

Part Number WH16X27181
Condition New
Brand GE (General Electric)
Part Type Washer Suspension Rod Assembly
Appliance Type Unitized Laundry Center (Stacked Washer/Dryer)
Rod Length 24 inches
Material Steel shaft with spring and polymer ball joints
Quantity 1 (sold individually)
Companion Rod WH16X27182 (for different mounting positions on same machine)

Installation & Safety Notes

Safety Warning
Unplug the laundry center from the wall outlet before beginning any work. This is a stacked unit — ensure it is stable and will not tip during service. Never attempt to tilt or move the unit alone. Wear work gloves to protect your hands from sharp cabinet edges. Before removing any rods, photograph or label which part number is in which position — the WH16X27181 and WH16X27182 are position-specific and should not be swapped between bracket locations. When removing the old rods, support the washer tub to prevent it from dropping onto internal components. After installing the new rod(s), confirm all mounting points are fully seated before restoring power.

Frequently Asked Questions

How do I find the parts diagram for my model?
Look up your full model number (e.g., GUD24ESSM0WW) on the GE Appliances parts site or a third-party parts database like Sears Parts Direct or AppliancePartsPros. Navigate to the suspension or tub section of the illustrated parts diagram. Each rod mounting position will be labeled with its part number — either WH16X27181 or WH16X27182. The diagram also shows the bracket hardware and tub supports, which you can inspect while the cabinet is open.
What is the most common ordering mistake with these rods?
Ordering four of the same part number. Because GE uses two different rod numbers for different mounting positions on the GUD24 platform, you need to order the right quantity of each. For example, if your diagram shows two positions labeled WH16X27181 and two positions labeled WH16X27182, you need two of each — not four of one. The rods look similar and are the same length, but they are designed for specific bracket locations and are not interchangeable between positions.
What is the difference between the WH16X27181 and WH16X27182?
Both are 24-inch suspension rods with steel shafts, spring dampers, and ball joints. They are designed for different mounting positions on the GUD24 cabinet frame. The positions they serve differ in bracket angle and force direction during tub oscillation, so each rod is tuned — in spring rate, ball joint offset, or both — for the loads its designated location experiences. They look similar enough that it is easy to mix them up, which is why labeling or photographing positions before removal is important.
Can I order just one rod if only one position looks worn?
You can. The rods are sold individually, so you can order exactly the quantity you need. However, most technicians recommend replacing all rods on the machine at once because they wear at similar rates. A single new rod with full spring tension alongside worn rods with reduced tension creates uneven damping across the tub. If budget is a constraint, replacing just the failed rod will stop the immediate problem, but expect to return for the remaining rods within a few months as they continue to degrade.
How do I know if the cross-reference number on my old rod matches this listing?
If the number on your old rod or in your parts diagram matches any of the cross-reference numbers listed on this page — 4588127, AGE26968, AP6328300, EAP12343388, PD00062747, or PS12343388 — the WH16X27181 is the current replacement. These are earlier catalog numbers, industry codes, and third-party identifiers that all resolve to this same rod. Part numbers from catalog systems like AP (Erp/Exact Replacement Parts) and PS (Sears/Kenmore) are common in parts databases and are equivalent to the GE OEM number.
I have a GUD27 or GTUP model — will this rod fit?
No. The WH16X27181 is a 24-inch rod designed for the GUD24 platform. GE's GUD27 and GTUP-series laundry centers are larger units that use different rod lengths — typically 27 inches or longer — with different part numbers and bracket hardware. Installing a 24-inch rod in a 27-inch platform will result in a rod that is too short to reach both mounting points. Always confirm the rod length and part number against your specific model's parts diagram before ordering.
Genuine OEM Part Fast Shipping Easy Installation
View full details
WH16X27181 Washer Genuine Suspension Rod Assembly  Parts-O-Matic

WH16X27181 Washer Genuine Suspension Rod Assembly

List Price:  $38.00
$29.50
 per 

Model Compatibility

Search your appliance model number below. Supports partial or full model search.

🔍 Search Model Number

Type your full or partial model number above to instantly check if this part fits your appliance.

✓ Guaranteed Fit — exact model match found.
No matching model found. Please verify your full model number or contact support.
Loading compatible models...
Model Number Manufacturer Appliance Type

⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.

SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!