WH13X26637 Washer Genuine OEM Water Valve
- Sku:
- WH13X26637
- Vendor:
- GE
Have a question?
WH13X26637 Washer Genuine OEM Water Valve
WH13X26637 Genuine OEM GE Washer Water Inlet Valve
The WH13X26637 is a Genuine OEM GE replacement quad water inlet valve assembly compatible with select GE and GE Profile top-load washers in the GTW, GTV, GTN, PTW, and related series. This is a quad (4-solenoid) valve assembly that controls the flow of hot water, cold water, bleach dispenser water, and fabric softener dispenser water from the household supply lines into the washer tub and dispenser compartments. Each solenoid port is independently controlled by the washer's control board. When any port fails, the washer may not fill, fill too slowly, fill with the wrong temperature, overfill, fail to dispense bleach or fabric softener, or drip water between cycles.
As a Genuine OEM part manufactured by GE to factory specifications, the WH13X26637 is a direct current-production replacement for the earlier WH13X24058. It measures approximately 7"L x 3"W x 3"H with multi-colored ports (blue, green, red, tan, silver, and gold) for easy identification of each solenoid's function. It directly replaces WH13X24058, WH13X26637-25PK, 4546358, AP6282070, EAP12171559, PD00037665, and PS12171559. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The WH13X26637 Genuine OEM GE Washer Water Inlet Valve fixes GE top-load washers that won't fill, fill slowly, fill with wrong temperature, won't dispense bleach or fabric softener, overfill, or drip water between cycles. Quad (4-solenoid) valve. Approx. 7"L x 3"W x 3"H. Multi-color port identification. Genuine OEM. Replaces WH13X24058, WH13X26637-25PK, 4546358, AP6282070, EAP12171559, PS12171559. Compatible with GE GTW, GTV, GTN, PTW series top-load washers.
Common Problems This Part Fixes
- Washer not filling with water at all when a cycle is started
- Washer filling very slowly — one or more solenoid ports partially blocked or failing
- Washer filling with only cold or only hot water — one temperature solenoid has failed
- Washer overfilling or filling continuously — valve port stuck open
- Bleach not dispensing during the wash cycle
- Fabric softener not dispensing at the rinse cycle point
- Water dripping into the tub between cycles — valve port not sealing completely
- Water leaking from the back of the washer near the valve body
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH13X26637, WH13X24058, AGE26282, AP6282070, EAP12171559, PD00037665, PS12171559.
WH13X26637 is the current updated part number superseding WH13X24058. If your washer's parts diagram shows WH13X24058, the WH13X26637 is the correct current replacement. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This water inlet valve is compatible with select GE and GE Profile top-load washers from the following series:
- GE washers — GTW680 series (GTW680BPL0DG, GTW680BPL1DG, GTW680BPL2DG, GTW680BSJ0WS, GTW680BSJ1WS, GTW680BSJ3WS, GTW680BSJ4WS, GTW680BSJ5WS, GTW680BSJ6WS and related models)
- GE washers — GTW685 series (GTW685BPL0DG, GTW685BPL1DG, GTW685BSL1WS, GTV685BSL0WS and related models)
- GE washers — GTW720 series (GTW720BPN0DG, GTW720BSN0WS and related models)
- GE washers — GTW725 series (GTW725BPN0DG, GTW725BSN0WS and related models)
- GE washers — GTW750 series (GTW750CPL0DG, GTW750CPL1DG, GTW750CSL0DG, GTW750CSL0WS, GTW750CSL1WS and related models)
- GE washers — GTW755 series (GTW755CPM0DG, GTW755CSM0WS, GTW755CSM1WS and related models)
- GE Profile washers — PTW600, PTW605, PTW700, PTW705 series and related models
- GE washers — GTN755 series (GTN755CPM1DG and related models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
- Genuine OEM part manufactured by GE to factory specifications — guaranteed fit and performance
- Quad (4-solenoid) valve assembly — independently controls hot water, cold water, bleach dispenser, and fabric softener dispenser ports
- Multi-colored ports for easy solenoid identification during installation
- Dimensions: approximately 7"L x 3"W x 3"H
- Current updated part number — directly supersedes WH13X24058
- Compatible with GE GTW680, GTW685, GTW720, GTW725, GTW750, GTW755, PTW600, PTW605, PTW700, PTW705, GTN755 series top-load washers
- DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
| Part Number | WH13X26637 |
| Supersedes | WH13X24058 |
| Part Type | Washer Water Inlet Valve Assembly (Quad / 4-Solenoid) |
| Condition | Genuine OEM |
| Application | GE and GE Profile Top-Load Washers |
| Solenoids | 4 (hot, cold, bleach, fabric softener) |
| Dimensions | Approximately 7"L x 3"W x 3"H |
| Port Colors | Multi-color (blue, green, red, tan, silver, gold) |
| Material | Plastic / Metal |
| Compatible Brands | GE, GE Profile |
Installation Notes
Frequently Asked Questions
What is the difference between WH13X26637 and WH13X24058?
These are the same quad water inlet valve assembly — WH13X26637 is the current updated part number that GE issued to supersede the earlier WH13X24058. If your washer's documentation, parts diagram, or old valve label shows WH13X24058, the WH13X26637 is the correct current replacement to order. Both are quad (4-solenoid) valve assemblies with the same port configuration and function.
What does each solenoid port on this quad valve control?
The WH13X26637 quad valve has four independently operated solenoid ports. The hot water port opens to supply hot water from the household supply line. The cold water port supplies cold water. The bleach dispenser port delivers cold water through the bleach compartment at the appropriate point in the wash cycle. The fabric softener port delivers water through the softener compartment during the rinse cycle. When any single solenoid fails, only the function it controls is affected — the rest of the valve continues to work normally.
My washer won't fill and shows an error code — is it the water inlet valve?
A fill error code on compatible GE models commonly points to the water inlet valve. Before replacing the valve, confirm that both supply valves behind the washer are fully open, neither supply hose is kinked, and the household water pressure is adequate. You can test each solenoid coil with a multimeter — a working coil shows resistance (typically 200–500 ohms); an open circuit confirms that coil has failed and the valve needs replacement. If all coils test good but the washer still won't fill, the issue may be with the control board or water pressure.
My washer fills fine but won't dispense fabric softener — could it be the valve?
Yes — if only the fabric softener dispenser function is affected, the solenoid coil controlling that specific port has likely failed. Since it is part of the same quad valve assembly, replacing the entire WH13X26637 assembly resolves the failed port. Individual solenoid ports cannot be replaced — the complete quad valve assembly must be replaced when any port fails.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by GE to factory specifications. It is the exact same quad water inlet valve assembly installed in compatible GE and GE Profile top-load washers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.