WE12X10014 Dryer Genuine OEM Drum Belt
- Sku:
- WE12X10014
- Vendor:
- GE
Have a question?
WE12X10014 Dryer Genuine OEM Drum Belt
GE WE12X10014 Dryer Genuine OEM Drum Belt
87-inch, 4-rib drum drive belt for select GE, Hotpoint, RCA and Kenmore dryers.
Product Overview
The GE WE12X10014 Dryer Genuine OEM Drum Belt connects the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This genuine GE replacement belt is designed for compatible GE, Hotpoint, RCA, and select Kenmore dryers that use the common 87-inch, 4-rib drive belt.
Quick Answer
WE12X10014 is an approximately 87 inch long × 1/4 inch wide dryer belt with 4 ribs/ridges. It replaces several earlier GE belt numbers including WE12X42 and WE12X82.
Common Problems This Part May Fix
- Dryer drum does not turn
- Motor runs but drum stays still
- Belt is broken, stretched, glazed, or frayed
- Squealing or slapping noise from a damaged belt
- Dryer will not tumble properly
Replaces and Cross-References
Cross-reference numbers are provided for identification. This listing is for Genuine GE OEM part WE12X10014.
Compatibility
Fits select GE, Hotpoint, RCA and Kenmore dryers. Compatible model examples include:
Important: This is only a partial compatibility list. Verify the complete dryer model number and original belt part number before ordering.
Key Features
- Genuine GE OEM replacement part
- Approx. 87 inches long
- Approx. 1/4 inch wide
- 4-rib / 4-ridge drive surface
- Transfers motor power to dryer drum
- Fits many GE-built dryer platforms
Product Specifications
| Manufacturer Part Number | WE12X10014 |
| Brand | GE Genuine OEM |
| Part Type | Dryer Drum Drive Belt |
| Length | Approx. 87 in. |
| Width | Approx. 1/4 in. |
| Ribs / Ridges | 4 |
| Condition | New |
| Part Quality | Genuine OEM |
| Package Quantity | 1 Belt |
Installation Notes
- Unplug the dryer before service.
- Access the drum and release belt tension from the idler pulley.
- Remove the old belt and inspect the idler pulley and motor pulley for wear or debris.
- Install the new belt with the ribbed side against the drum where specified by the dryer design.
- Route the belt around the motor pulley and idler exactly as shown in the appliance service diagram.
- Rotate the drum by hand to confirm smooth tracking before reassembly.
Diagnostic tip: A broken belt can result from a seized idler pulley, worn drum bearing/glides, or an obstructed drum. Inspect related components before installing the new belt.
Frequently Asked Questions
How long is WE12X10014?
It is approximately 87 inches long and 1/4 inch wide.
How many ribs does this belt have?
It has 4 ribs/ridges on the drive surface.
Does it replace WE12X42 and WE12X82?
Yes. WE12X10014 is commonly listed as the replacement for those earlier belt numbers.
Is this a Genuine GE OEM belt?
Yes. This listing is for Genuine GE OEM part WE12X10014.
Shop With Confidence
Verify the complete dryer model number before ordering. Our compatibility team can help confirm whether Genuine GE OEM WE12X10014 is correct for your dryer.