- Sku: WE03X37319
WE03X37319 Dryer Genuine OEM Drum Bearing Slide
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
The WE03X37319 is a genuine OEM 2-pack of white front drum bearing slides for GE and Hotpoint dryers. Before ordering, you can confirm whether your bearing slides are the source of the noise by inspecting them visually and running a simple hand-spin test. This part-specific approach helps you avoid replacing the wrong component — the same squealing symptom can come from the drum belt, the idler pulley, or the rear drum bearing, and each has a different signature when you know what to listen and look for.
The quickest confirmation is to remove the front panel and examine the slides directly. Worn slides will show visible grooves, shiny flat spots, or areas where the white plastic has worn completely through to expose the metal bearing ring beneath. If you see dark residue on the drum rim or inside the front of the cabinet, that is slide material that has been ground away — and it is the same material that causes the dark marks on clothes. A slide that still has its full thickness but shows glazing or discoloration is not yet failed but is nearing the end of its service life.
If your GE or Hotpoint dryer squeals, scrapes, or leaves dark streaks on clothing, worn front bearing slides are the most common cause. The WE03X37319 is a genuine OEM 2-pack of white bearing slides that fits a specific position on the front bearing assembly. Confirm the noise comes from the front bearing — not the belt or rear bearing — by spinning the drum by hand with the front panel removed. Easy to moderate install, approximately 30–60 minutes.
- Squealing or scraping noise during the tumble cycle
- Grinding sound coming from the front of the dryer
- Dark marks, streaks, or smudges on clothes after drying
- Drum does not spin smoothly — catches or hesitates
- Dark residue visible on the drum rim or inside the front cabinet
The WE03X37319 is GE's current part number for this white dryer drum bearing slide 2-pack. It supersedes earlier part numbers WE3M51 and WE1M404 and cross-references to the following distributor catalog numbers.
COMPATIBILITY
This genuine OEM bearing slide 2-pack fits select GE, Hotpoint, and Kenmore dryers and washer/dryer combos. GE uses multiple slide profiles on the same front bearing assembly — verify your model's parts diagram shows the WE03X37319 for the position that needs replacement.
Sample compatible models: GTD42EASJ2WW, GTD65EBSJ0WS, GTD75ECPL0DG, GFD45ESSM0WW, GTDP490ED5WS, GTX22EASK0WW, HTDX100ED3WW, HTX24EASK0WS, GUD27ESSJ1WW, PFDS450EL2WW
- Genuine OEM GE dryer drum bearing slide — not an aftermarket equivalent
- Sold as a 2-pack — replace both slides in the same position together
- White molded plastic with snap-fit tab for secure seating in the bearing ring
- Low-friction glide surface prevents metal-to-metal contact between drum and bearing
- Stops squealing and eliminates dark marks on clothes caused by worn slide material
- Easy to moderate installation — approximately 30 minutes to 1 hour
| Part Number | WE03X37319 |
| OEM Part Number | WE03X37319 |
| Condition | New |
| Brand | GE |
| Part Type | Dryer Drum Bearing Slide |
| Appliance Type | Dryer / Washer Dryer Combo |
| Color | White |
| Quantity | 2-Pack |
| Compatible Brands | GE, Hotpoint, Kenmore |
| Supersedes | WE3M51, WE1M404 |
Disconnect the dryer from its power source before beginning any work. For gas dryers, also shut off the gas supply valve. Remove the top panel and front panel to access the front bearing assembly — disconnect the door switch wiring harness before lifting the front panel away. Support the drum to prevent it from dropping forward once the front panel is removed. When installing the new slides, press each one firmly into its slot until the snap-fit tab clicks. If a slide does not seat easily, do not force it — verify you have the correct part number for that bearing position.
Have a question?

WE03X37319 Dryer Genuine OEM Drum Bearing Slide

