- Sku: WE03X29704
WE03X29704 Dryer Genuine Drive Belt
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
WE03X29704 Dryer Drive Belt — Genuine OEM GE
Product Description
A dryer that runs but does not tumble clothes almost always points to the drive belt — but "drum won't turn" can have more than one cause. Before ordering a belt, it is worth ruling out the other possibilities so you do not replace a part the dryer does not need. The motor, the idler pulley, and the drum support bearings or slides can all prevent the drum from turning, and each produces a slightly different set of clues. A few quick checks can confirm whether the belt is the problem or point you toward the actual failed component.
The WE03X29704 is a genuine OEM GE poly-V ribbed drive belt designed for select GE front-load and ventless dryer platforms. It wraps around the drum, the spring-loaded idler pulley, and the motor pulley to transfer motor rotation to the drum. This belt fits both electric and gas versions of compatible models — the belt is a mechanical component with no electrical function.
Quick Answer
How Do You Confirm It's the Belt?
Open the dryer door and try to spin the drum by hand. If the drum turns freely with almost no resistance, the belt is broken — an intact belt connects the drum to the motor, so hand-turning the drum should feel like you are also turning the motor (noticeable drag). If the drum does NOT turn freely — it feels stuck, grinds, or barely moves — the problem is more likely a seized drum bearing, a jammed idler pulley, or a locked motor, not a broken belt. If the dryer does not start at all and makes no sound, the issue may be electrical (door switch, start switch, control board) rather than the belt. The WE03X29704 is the genuine OEM replacement belt for select GE front-load dryer platforms.
Common Symptoms
- Motor runs and blower pushes air, but the drum does not rotate
- Drum turns freely by hand with no resistance (belt is broken)
- Squealing, chirping, or high-pitched noise while the drum turns (belt is slipping)
- Rhythmic thumping as a worn belt skips on the drum surface
- Dryer does not start at all (on models with a belt-detect switch)
Replaces Part Numbers
The WE03X29704 is the current GE part number for this belt. If your old belt or parts diagram shows any of the following numbers, the WE03X29704 is the correct replacement.
Compatibility & Model Cross Reference
This belt fits select GE-manufactured dryers on the newer front-load and ventless platform. It fits both electric and gas versions of compatible models. Confirm your model number before ordering.
GE: GFD55ESMN0WW, GFD55GSSN0WW, GFD85ESSN0WW, GFD85GSSN0WW, GFD65ESMN1SN, GFV55ESSN0WW
GE Profile / Café: PFD87ESMV0RS, PFD87ESPV0RS, PFD95GSPW0GN, PFD95GSPW0DS
Hotpoint: Select dryer models on the same platform
Not every GE dryer uses this belt. The WE03X29704 is specific to GE's newer front-load dryer platform (GFD, GFV, PFD series). Older top-load GE dryers (GTD, DBXR, DBLR series) use the WE03X29897 belt — these are NOT interchangeable. Your model number is on a sticker inside the door opening. Send us your model number and we'll confirm compatibility.
Key Features
- Genuine OEM GE dryer drive belt — poly-V ribbed design
- Transfers motor rotation to the dryer drum via idler pulley tension system
- Fits select GE front-load and ventless dryer platforms (GFD, GFV, PFD series)
- Works on both electric and gas versions of compatible models
- Made in the United States
- Direct drop-in replacement with the same belt routing as the original
Product Specifications
| Part Number | WE03X29704 |
| Condition | New |
| Brand | GE |
| Part Type | Dryer Drive Belt (Drum Belt) |
| Appliance Type | Dryer (Electric and Gas) |
| Belt Style | Poly-V Ribbed |
| Material | Rubber |
| Country of Origin | United States |
Installation & Safety Notes
Unplug the dryer from the electrical outlet before beginning work. On gas models, also shut off the gas supply valve. Access the belt by removing the top panel and then the front panel. Photograph the old belt routing before removal — the new belt must follow the exact same path around the drum, idler pulley, and motor pulley. The ribbed side of the belt faces the motor and idler pulleys. The flat side rides against the drum. After installation, rotate the drum by hand several full turns to verify the belt tracks straight and the idler pulley maintains tension. Reassemble all panels and restore power before testing.
Frequently Asked Questions
- What else besides a broken belt can prevent the drum from turning?
- A seized idler pulley can lock the belt in place and stall the drum — if the pulley bearing has failed, the belt cannot move around it. A seized or damaged drum bearing or drum slide can create enough friction that the motor cannot turn the drum even with an intact belt — in this case the motor may hum, trip the thermal overload, or shut off. A failed motor will not turn the belt at all — no motor sound, no blower noise, nothing happens. And on some GE models, a broken belt trips a belt-detect switch that prevents the motor from starting — if the dryer does not start at all and makes no sound, check the belt switch in addition to the standard electrical components (door switch, start switch, thermal fuse).
- How do I distinguish belt noise from other dryer noises?
- A slipping belt typically produces a high-pitched squeal or chirp that occurs in rhythm with the drum rotation — it may come and go depending on load weight and may be louder at the start of a cycle when the drum is heaviest. A thumping or slapping sound can indicate a belt with a worn spot or a damaged edge riding unevenly on the drum. By contrast, a grinding or rumbling noise usually comes from worn drum support rollers or a dry drum bearing — these sounds tend to get louder over time and persist regardless of load size. A loud metallic scraping typically points to a drum glide or felt seal that has worn through. If the noise is clearly rhythmic and matches the drum speed, the belt or idler pulley is the most likely source.
- What is the hand-turn test?
- Open the dryer door and try to rotate the drum by hand. With an intact belt, turning the drum also turns the motor shaft through the belt — you will feel noticeable resistance and drag. If the drum spins freely with almost no effort, the belt is broken. This test takes a few seconds and is the fastest way to confirm a broken belt before you remove any panels. It does not work in reverse, though — a drum that is hard to turn could mean a seized bearing, a jammed idler, or foreign objects caught between the drum and the housing, not necessarily a belt problem.
- Some GE dryers have a belt switch — what is that?
- Some GE dryer models include a belt-detect switch (sometimes called a belt switch) that is mechanically engaged by the tension of the drive belt through the idler pulley assembly. When the belt breaks, the idler pulley loses tension and the switch opens, interrupting the motor circuit so the dryer will not start at all. On these models, a broken belt looks like a dryer that is completely dead — no motor, no blower, no tumbling. If your dryer does nothing when you press start, check for a broken belt in addition to the door switch, start switch, and thermal fuse. Not all GE dryers have this switch — many will continue to run the motor even with a broken belt.
- Does this belt fit both gas and electric dryers?
- Yes. The drive belt is a mechanical part that connects the motor to the drum. Gas and electric versions of the same GE dryer model share the same drum, motor, belt, and idler pulley — the only difference is the heat source. If the GE parts diagram for your gas model lists the WE03X29704, it is the same belt used in the electric version of that model.
- Should I inspect other parts while replacing the belt?
- Yes — with the dryer already disassembled, inspect the idler pulley (spin it by hand and listen for grinding or roughness), the drum support rollers or slides (check for flat spots or stiffness), and the felt drum seals (check for tears or missing sections). A worn idler pulley puts uneven stress on the new belt and can shorten its life. Worn drum rollers increase the torque needed to turn the drum, which also accelerates belt wear. Replacing worn support parts at the same time as the belt prevents a callback repair.
Have a question?

WE03X29704 Dryer Genuine Drive Belt
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.

