WB30T10130 Genuine OEM GE Range 12" Haliant Surface Element
The WB30T10130 is a factory-original GE 12-inch dual haliant surface element engineered for glass-top electric ranges. This element operates in a dual-zone configuration — a smaller inner heating ring and a full-diameter outer ring — each wired to its own pair of terminals on the infinite switch. When you select a low-to-medium heat setting the inner zone activates alone at 1,950W; higher settings bring both zones online for a combined 3,000W at 240V. This selective activation is what gives the 12-inch position its range, from gentle simmering in a small saucepan to rapid boiling in a large stockpot.
Because the haliant design incorporates a halogen heating component alongside the conventional radiant coil, the element reaches visible glow faster than radiant-only elements. The halogen lamp delivers near-infrared energy directly through the glass surface during the initial heat-up phase, which is why you see the element glow bright within seconds of turning the knob. Once the radiant coil reaches operating temperature it sustains the heat output. If the element has failed, you'll notice no glow at all, or a partial glow pattern where only one zone illuminates — either symptom confirms the element needs replacement.
🔧 Will This Fix Your Cooktop?
Replace this element if the 12-inch glass-top burner produces no heat, heats only in part of the cooking zone, or glows unevenly. Part Number:
WB30T10130 — Genuine OEM GE, 12-inch dual haliant, 3,000W / 1,950W at 240V.
Common Symptoms This Part Fixes
- 12-inch burner position produces no heat or glow at any setting
- Partial glow pattern — inner ring lights but outer ring stays dark, or the reverse
- Element takes abnormally long to heat or never reaches full temperature
- Visible hot spot or cold spot causing uneven cooking across the pan
- Burning smell from beneath the cooktop with no spill present
- Circuit breaker trips when the 12-inch burner is turned on
Replaces These Part Numbers
WB30T10130, 1474216, AGE23307, AH2321564, AP4344395, EA2321564, PD00008230, PS2321564
Compatible With
Compatible Brands
GE
Hotpoint
RCA
Kenmore
Fits select GE-platform glass-top electric ranges, including GE Profile and Café models that specify this part number. Kenmore models on the GE platform (typically 790- and 970-series model prefixes) may also use this element — confirm with your model's parts diagram.
Key Features
- Genuine OEM GE — factory-original part with exact-fit guarantee
- 12-inch dual haliant element with independent inner/outer zones
- 3,000W combined / 1,950W inner zone at 240V
- Halogen-assisted heat-up for faster cooking response
- Designed for ceramic glass (smooth-top) electric ranges
- Dimensions: 13.5" × 12.25" × 2.5", approximately 3 lbs
Specifications
| Part Number |
WB30T10130 |
| OEM Part Number |
WB30T10130 |
| Condition |
Genuine OEM |
| Part Type |
Radiant / Haliant Surface Element |
| Element Type |
Dual Haliant (dual-zone) |
| Element Size |
12 inches |
| Wattage |
3,000W / 1,950W at 240V |
| Voltage |
240V |
| Dimensions |
13.5" × 12.25" × 2.5" |
| Weight |
Approximately 3 lbs |
| Appliance Type |
Electric Range (glass-top / smooth-top) |
| Compatible Brands |
GE, Hotpoint, RCA, Kenmore (select models) |
⚠ Safety Warning
Disconnect the range from power at the circuit breaker before starting this repair. The element connects to 240V wiring inside the cooktop. Do not lift the ceramic glass surface while the range is energized. Allow all components to cool before handling. Support the glass top properly once raised — it can crack if allowed to fall or rest on its edge.
Frequently Asked Questions
Why does the element glow bright immediately but food takes a while to heat?
The bright glow you see in the first few seconds comes from the halogen lamp component, not the radiant coil. The halogen lamp heats up almost instantly and produces visible light along with infrared energy, but the bulk of the cooking heat comes from the radiant coil, which takes longer to reach full temperature. This is normal behavior — the halogen gives you fast initial heat at the glass surface while the coil ramps up. If the glow appears but the burner never reaches cooking temperature, the radiant coil portion may have failed while the halogen lamp still works, and the element should be replaced.
My pan wobbles on this burner — could the element be warped?
The element sits underneath the glass surface, so the pan rests on the glass, not the element. A wobbling pan is almost always caused by the pan itself (warped bottom) or by the glass surface not being level, not by the element beneath it. However, if the element has suffered a catastrophic failure — a melt-through or arc event — it can deform and push up against the underside of the glass, creating a subtle high spot. If you can see a discolored bump or raised area on the glass directly above the element, that's a sign the old element damaged the glass surface during failure. In that case you may need the glass replaced as well, though many owners live with cosmetic damage if the glass isn't cracked.
Is GE Profile the same as standard GE for this element?
GE Profile and GE Café are sub-brands of GE Appliances — they use the same parts platform. If a GE Profile or Café range lists WB30T10130 in its parts diagram, it takes the identical element as a standard GE range that lists the same number. The difference between these sub-brands is in features (controls, finishes, convection options), not in the basic heating elements. That said, not every GE Profile range uses this particular element — some use triple-zone or different-wattage elements in the 12-inch position. Always verify by part number, not by brand tier alone.
Can a failing element damage other components?
Yes. The most common secondary damage is to the infinite switch that controls the burner. When an element develops an internal short, it can draw excessive current through the switch contacts, pitting or welding them. A shorted element can also trip the range's internal thermal fuse or, in severe cases, damage wiring in the terminal block. If you replace the element and the burner still doesn't work correctly — runs at full heat regardless of knob position, for example — the infinite switch likely sustained damage from the old element and needs replacement as well. Replacing both at the same time is a common preventive measure when the old element shows obvious burn-through.
How do I know if I need the 12-inch dual haliant vs. a different 12-inch element?
Count the terminal posts on the old element once you lift the glass top. A dual haliant element like the WB30T10130 has four terminals — two for the inner zone and two for the outer zone. A single-zone 12-inch radiant element has only two terminals. A triple-zone element has six. If your old element has four terminals and your model's parts diagram lists WB30T10130, this is the correct replacement. If the terminal count doesn't match, you have a different element type in that position, even though the cooking surface diameter looks the same.
✔ Genuine OEM Part
✔ Secure Checkout
✔ Compatibility Support
✔ Fast US Shipping
