- Sku: WB24X47193
WB24X47193 Range Genuine OEM Triple Burner Infinite Switch
BEST PRICE
We back all products with a 1 year guarantee.
FREE SHIPPING
No code needed, just head for checkout!
This is a demonstration store. You can't purchase this product.
Genuine OEM WB24X47193 Range Triple Burner Infinite Switch
When a triple burner on a GE electric range stops responding correctly to the control knob, the diagnostic path follows a clear order: infinite switch first, element second. The triple burner — also called a haliant element — has three concentric heating rings that expand the heated area for larger cookware, but all three rings route through a single infinite switch behind the control panel. That means a failed switch can mimic an element failure: no heat on any ring, partial heat on some rings, or full power that won't turn down.
The WB24X47193 is the current GE genuine OEM infinite switch for triple burner positions on compatible electric ranges and cooktops. It supersedes the earlier WB24X25152 and carries the same electrical ratings and mounting dimensions. Because this is a single-switch-per-burner design, only one switch needs to be replaced per affected burner position — you do not need to replace switches for burners that are working normally.
Quick Answer
Will This Fix My Range?
The Genuine OEM WB24X47193 Infinite Switch controls the triple burner on GE electric ranges and cooktops. Replace it when the triple burner won't heat, is stuck on high, cycles erratically, or the hot surface light won't turn off. Diagnostic shortcut: if the burner is stuck on high regardless of knob position, it's the switch — elements can't "stick on" by themselves.
Common Symptoms
- Triple burner is stuck on high and won't adjust to lower settings
- Burner won't heat at all — no response when the knob is turned
- One or two rings of the triple element don't heat while others do
- Burner starts heating then shuts down after several seconds
- Hot surface indicator light stays on continuously after use
- Erratic heating — burner cycles between too hot and too cold
Replaces Part Numbers
Manufacturers update part numbers over a product's lifecycle. These are the known cross-reference and superseded numbers for this switch:
WB24X47193, WB24X25152, 191D8398P005, MHSA-W779-GEM, AGE1176033, AP7216143, EAP11773823, FIX11773823, PS11773823
If your old switch or parts diagram lists any of these numbers, this is the correct replacement.
Compatibility
This infinite switch is designed for select GE, Hotpoint, Monogram, Café, and Haier electric ranges and cooktops equipped with a triple (3-ring) haliant surface element:
- GE JB750, JB755, JS750 series electric ranges
- GE PB930, PB935, PB960, PB965, PB980 series electric ranges
- GE PCB980 series electric ranges
- GE PCS968 series slide-in electric ranges
- Select Café and Monogram built-in electric models
Note: This is a partial model list — the switch fits many additional GE-family ranges and cooktops. GE ranges have multiple surface element positions that use different switches, so confirm that your model uses WB24X47193 (or its predecessor WB24X25152) for the triple burner position specifically. Contact our support team with your model number for verification.
Key Features
- Genuine OEM GE infinite switch — factory-spec replacement
- Controls triple burner (3-ring haliant) surface element
- Provides full range of heat adjustment from low to high
- Direct replacement with correct terminal layout and electrical ratings
- Current part number — supersedes WB24X25152
- Moderate DIY repair, approximately 15–30 minutes
Product Specifications
| Part Number | WB24X47193 |
| Supersedes | WB24X25152 |
| Part Type | Infinite Switch Control |
| Condition | Genuine OEM |
| Brand | GE |
| Controls | Triple Burner (3-Ring Haliant Element) |
| Compatible Brands | GE, Hotpoint, Monogram, Café, Haier |
| Appliance Type | Electric Range / Cooktop |
| Install Time | 15–30 minutes |
Frequently Asked Questions
How do I tell if it's the switch or the triple element that failed?
Start with the switch. Disconnect power, access the switch behind the control panel, and test with a multimeter set to continuity. Turn the knob to High — you should read near-zero ohms across the load terminals. If the switch shows proper continuity at each setting but the element still won't heat, the problem is in the element itself. A common clue: if the burner is stuck on high or won't adjust temperature, it's the switch. If the burner heats on some rings but not others even with a known-good switch signal, a heating circuit inside the element has failed.
What is a triple burner and how is it different from a regular burner?
A triple burner (or haliant element) has three concentric heating rings — small, medium, and large — built into one surface element. You select the ring size by choosing different heat settings or, on some models, by pressing a separate element size button. The triple element lets you match the heated area to your cookware, which improves efficiency and prevents scorching on small pots. Despite having three rings, the entire assembly is controlled by a single infinite switch at that burner position.
My hot surface indicator light stays on after I turn the burner off. Is that the switch?
It can be. The hot surface indicator light is controlled by a separate indicator switch module, but if the infinite switch has failed in the closed position, it's sending continuous power to the element — the burner is actually still on, so the indicator is correct. Turn the knob to Off and check whether the burner is still producing heat. If it is, the infinite switch is stuck closed and needs to be replaced. If the burner is truly off but the indicator stays lit, the indicator switch itself is the problem.
Do I need any special tools to replace this switch?
No. A Phillips screwdriver or nut driver to remove the back panel, and your hands to pull off the spade connectors, is all that's needed. A multimeter is optional but recommended for confirming the diagnosis before ordering. The switch mounts in a bracket behind the control panel with a standard clip or screw — no soldering, no special wiring.
My parts diagram shows WB24X25152 for this position. Can I use WB24X47193?
Yes. GE has superseded WB24X25152 with WB24X47193. It's the same switch with the same fit, electrical ratings, and terminal layout. If you order WB24X25152 from GE directly, you will receive the WB24X47193 — it is the current production number.
Have a question?
WB24X47193 Range Genuine OEM Triple Burner Infinite Switch
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.