- Sku: W11612326
W11612326 Dishwasher Genuine Circulation Pump
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
W11612326 Dishwasher Genuine Circulation Pump
Product Description
Troubleshooting a dishwasher that fills, makes little washing noise, and drains at the end of the cycle? The genuine Whirlpool W11612326 circulation pump and motor is the wash-water pump used on select Whirlpool-built dishwashers. It powers internal water circulation rather than emptying the tub.
Before replacing the pump, confirm proper filling and check filters, spray arms and the pump's water path for obstruction. Electrical testing should follow the manufacturer's model-specific service procedure and be performed by a qualified person. A pump that fails to run can reflect either a motor fault or a power/control problem.
Quick Answer
When a dishwasher fills and drains but the spray arms do not operate, W11612326 may be needed if the circulation motor has failed. Check for blocked circulation and electrical faults first, then verify compatibility with the exact model.
Common Symptoms
- Normal fill and drain operations with no wash-water spraying
- Abnormally quiet wash phase after filling
- Pump motor not operating during expected circulation
- Poor cleaning performance traced to absent wash circulation
Replaces Part Numbers
The manufacturer replacement numbers below are separate from distributor catalog references. Fitment must still be checked by the dishwasher model.
Compatibility & Model Cross Reference
Fits select Whirlpool-manufactured dishwashers, including select Whirlpool, Kenmore and Amana models. Sample model-specific Parts Dr fitment results:
Whirlpool: WDF320PADW3, WDF520PADM7, WDF520PADB9, WDF330PAHS4, WDP370PAHB0, WDP560HAMB1
Kenmore: 665.13009N511, 665.14422N511
Amana: ADB1400AGW1
This is a partial sample list. Not every dishwasher from these brands uses this motor. Confirm your exact model in the manufacturer's wash pump parts diagram. Check the identification label near the dishwasher door and contact us with your full model number for fitment support.
Key Features
- Original Whirlpool wash circulation motor/pump
- Manufacturer reference W11612326
- Designed for selected Whirlpool, Amana and Kenmore dishwasher models
- Cross-referenced against older pump motor part numbers
Product Specifications
| Part Number | W11612326 |
| OEM Part Number | W11612326 |
| Brand | Whirlpool |
| Condition | New, Genuine OEM |
| Part Type | Dishwasher circulation pump and motor |
| Appliance | Dishwasher |
| Function | Moves wash water through spray system |
| Included Parts | Circulation pump and motor. Additional seals, grommets and hoses not confirmed included |
Installation & Safety Notes
Frequently Asked Questions
- How do I tell whether the pump is running?
- Listen for wash circulation after the fill phase and follow the appliance's service diagnostic procedure. Silence alone does not prove motor failure.
- Could a water-level problem prevent spray action?
- Yes. A low fill level can affect wash performance even when the pump is working.
- Should I buy W11612326 if the dishwasher will not drain?
- Not solely for a no-drain symptom. The drain pump and drain path should be diagnosed separately.
- What does AP7193729 identify?
- AP7193729 is an AppliancePartsPros catalog reference for genuine Whirlpool W11612326.
- Can a faulty control board cause similar symptoms?
- Yes. Failure to supply the pump with power may be caused by a switch, connection, wiring or control issue. Follow service guidance.
Genuine Whirlpool OEMCompatibility SupportSecure Checkout
Confirm the dishwasher model and included fittings before ordering. No replacement is guaranteed to resolve unrelated faults.
Have a question?

W11612326 Dishwasher Genuine Circulation Pump

