W11168740 Washer Genuine OEM Cold Water Inlet Valve
- Sku:
- W11168740
- Vendor:
- Whirlpool
Have a question?
W11168740 Washer Genuine OEM Cold Water Inlet Valve
W11168740 Washer Genuine OEM Cold Water Inlet Valve
The W11168740 is a genuine Whirlpool OEM cold water inlet valve for Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, Amana, and related models. Located at the rear of the washer, this valve connects to the cold water supply and solenoid wiring, opening to admit cold water into the tub as the cycle calls for it and closing once the correct fill level is reached.
Blue in color, with two solenoids, a standard hose fitting inlet, and a single water outlet. Common causes of failure include a worn internal seal that no longer closes fully, or general electrical wear in the solenoid. Symptoms of a failing valve include the washer not getting any cold water, filling slowly, not filling at all, or continuing to fill or leak water even after the washer has been unplugged. It directly replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073.
Quick Answer
The W11168740 Washer Genuine OEM Cold Water Inlet Valve fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers that aren't getting cold water, are filling slowly, aren't filling at all, or keep leaking or filling even when unplugged. Blue, two solenoids. Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073. If water keeps running even after the washer is unplugged, try shutting off the cold water supply valve — if that stops it, the cold water inlet valve isn't closing properly and needs replacing.
Common Problems This Part Fixes
- Washer not getting any cold water
- Washer filling slowly
- Washer not filling at all
- Water continuing to fill or leak even after the washer is unplugged
- Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer cold water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11168740, WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This cold water inlet valve is compatible with select Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, and Amana washers built on the Whirlpool platform.
Note: This is the cold water valve only — a separate hot water valve is used alongside it on the same washer. If your washer isn't getting hot water rather than cold, you likely need the companion hot water valve instead. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which valve your washer needs.
Key Features
- Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate
- Regulates cold water flow into the washer tub during fill
- Resolves "no cold water," "fills slowly," "won't fill," and "leaks or fills when unplugged" symptoms
- Blue color with two solenoids
- Standard hose fitting inlet, single water outlet
- Direct drop-in replacement — matches the original mounting and hose connections
- Replaces WPW10240949, W10240949, 33390069, W10921514, AP6285450, AWP43125, EAP12348073, PD00038781, PS12348073
- Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Amana top-load washers
- Genuine OEM replacement — guaranteed fit, materials, and performance
- DIY-friendly repair, typically 20 to 30 minutes
Product Specifications
| Part Number | W11168740 |
| Part Type | Washer Cold Water Inlet Valve |
| Condition | Genuine OEM |
| Brand | Whirlpool |
| Location | Rear of the appliance |
| Color | Blue |
| Solenoids | 2 |
| Inlet | Standard hose fitting |
| Outlet | 1 |
| Repair Difficulty | Easy — 20 to 30 minutes |
| Quantity | 1 valve (sold individually) |
| Compatible Brands | Whirlpool, Kenmore, Maytag, KitchenAid, Amana |
Installation Notes
Frequently Asked Questions
Water keeps running even after I unplug my washer. Is this the valve I need?
Yes, this is a documented symptom of a cold water inlet valve that's no longer closing properly. One customer had exactly this experience — after unplugging the washer, water continued to run, and shutting off the cold water supply valve at the wall stopped it. That confirmed the cold water inlet valve itself wasn't sealing shut, even with no power to the washer, and replacing it resolved the issue.
Should I replace the hot water valve at the same time?
It's worth considering, especially if both valves are the same age. Several customers have replaced both the hot and cold valves together in a single repair, since they're mounted in the same area and access is already open — one customer described it as "very quick & easy" to do both at once.
Is this a difficult repair?
No, this is a straightforward repair. Multiple customers describe it as easy, typically secured with just a few screws and simple electrical clamp connections — one review specifically noted the whole job took about 20 minutes.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the cold water inlet valve originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.