Skip to product information
Sale
  • Sku: W10440729

W10440729 Washer Genuine OEM Suspension Rod Support Kit

List Price:  $16.00
$13.50
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

W10440729 Washer Suspension Rod Support Kit — Genuine OEM

The W10440729 is a genuine OEM suspension rod support kit for Whirlpool-built top-load washers. Before ordering, it helps to confirm that worn suspension supports are actually the cause of the vibration. A washer that shakes during spin can be caused by several things — worn suspension cups, an unbalanced load, a washer that is not level, a damaged drive hub, or even a failed shock absorber on models that use one. A quick diagnostic check narrows the problem to the suspension system before you commit to the repair.

Start by opening the lid and pressing down firmly on one side of the wash tub, then releasing. If the tub continues to rock or does not return to center, the suspension supports have lost their damping. Next, look underneath the washer or tip the cabinet back — inspect each suspension rod cup and bushing for cracks, flat spots, or missing material. A cup that is cracked through or a bushing that has collapsed confirms the W10440729 is the correct fix. If the cups look intact and the tub rebounds cleanly, the vibration is coming from somewhere else — check leveling, the drive hub splines, and the load distribution before replacing suspension parts.

QUICK ANSWER

Will This Fix Your Washer?

If the wash tub rocks excessively when pushed by hand and does not settle, the suspension rod supports have worn out. The W10440729 includes all four cup-and-bushing sets. If the tub rebounds normally and your washer still vibrates, check that all four leveling feet are firmly on the floor and the washer is level side-to-side and front-to-back — a leveling problem mimics worn suspension but costs nothing to fix.

Common Symptoms

  • Washer shakes or vibrates excessively during spin
  • Washer walks or shifts position while running
  • Loud banging or thumping noise during high-speed spin
  • Visible tub rocking when the drum changes direction
  • Vibration that has gradually worsened over months

Cross Reference Information

The W10440729 is the current Whirlpool part number for this suspension rod support kit. It replaces the following earlier part numbers and distributor catalog numbers.

W10440729, 2118951, W10215136, W10256551, W10316397, W10405423, W10560146, AH3502189, AP5306956, AWP40782, EAP3502189, EA3502189, PD00006079, PS3502189
COMPATIBILITY

This genuine OEM kit fits Whirlpool-manufactured top-load washers sold under the Whirlpool, Maytag, Kenmore, Amana, Crosley, Admiral, Inglis, and Roper brand names. Always confirm your model number before ordering.

Sample compatible models: WTW5000DW1, WTW4800XQ2, WTW5500XW2, WTW5700XW3, WTW4815EW1, MVWX600XW2, NTW4655EW1, 11021352112, 11026012012, 3DWTW4840YW0

Key Features

  • Genuine OEM Whirlpool suspension rod support kit
  • Includes 4 suspension ball cups and 4 suspension ball bushings (8 pieces total)
  • Cups measure 1-13/16" diameter × ⅞" H; bushings measure 1-1/2" diameter × 1" H
  • Dampens tub movement during wash and spin cycles
  • Covers all four suspension rod positions in one kit
  • Fits eight compatible brands across Whirlpool top-load washer platforms

Specifications

Part Number W10440729
Condition New
Brand Whirlpool
Part Type Suspension Rod Support Kit
Appliance Type Washer
Kit Contents 4 suspension ball cups, 4 suspension ball bushings
Material Plastic
Color White (opaque cups / translucent bushings)
Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Crosley, Admiral, Inglis, Roper
Supersedes W10405423, W10316397, W10256551, W10215136
Safety Warning
Unplug the washer and disconnect both water supply hoses before starting. The cabinet must be lifted or tipped back to access the suspension rods — this requires a second person or a prop to hold the cabinet safely in position. Do not reach under the cabinet while it is unsupported. After installing the new cups and bushings, run the washer's recalibration cycle so the control board relearns the tub balance profile.

Frequently Asked Questions

How do I confirm the suspension cups are the problem and not something else?
Open the lid and push down firmly on one edge of the wash tub. A healthy tub bounces once or twice and returns to center. A tub with worn supports keeps rocking, doesn't center, or makes a hollow clunking sound. If the tub rebounds normally, check leveling first — all four feet should be in solid contact with the floor and the washer should be level in both directions. Also inspect the drive hub splines on the agitator shaft for wear, since stripped splines can produce vibration during spin that feels like a suspension problem.
Could an unbalanced load cause the same shaking as worn suspension?
Yes, but the pattern is different. An unbalanced load produces shaking that varies from cycle to cycle — a heavy towel load shakes while a light mixed load runs fine. Worn suspension produces shaking that happens every cycle regardless of the load, and it typically gets worse over time. If the vibration is consistent across all load types, the supports are the likely cause.
My washer vibrates but only on the highest spin speed — is it the supports?
Possibly, but high-speed-only vibration can also indicate a leveling issue. At lower spin speeds the tub's inertia is manageable even with slightly worn supports; at high speed the forces multiply and the worn supports can no longer absorb them. Check leveling first, since it is free to fix. If the washer is level and the tub rocks when pushed by hand, the supports are worn and need replacement.
Do I also need to replace the suspension rods?
Not unless the rods themselves are bent, rusted, or the springs have lost tension. The W10440729 replaces only the cups and bushings that sit on the rods. If a rod is straight and its spring still pulls the tub upward with firm resistance, the rod is fine and only the support kit is needed. The rod kit is a separate part number. Most vibration problems caused by worn suspension are resolved by the support kit alone.
What is the recalibration cycle and why is it necessary?
Whirlpool top-load washers with electronic controls store a balance profile that tells the board how much tub movement to expect at each spin speed. When the suspension supports are replaced, the tub's movement characteristics change, and the old profile no longer matches. If you skip recalibration, the board may misread normal movement as an off-balance condition and reduce spin speed or throw an error code. The recalibration procedure varies by model and is documented in the technician's manual — typically taped inside the cabinet or behind the control panel.
Genuine OEM Part Fast Shipping In Stock 1–2 Hour Install
View full details
W10440729 Washer Genuine OEM Suspension Rod Support Kit

W10440729 Washer Genuine OEM Suspension Rod Support Kit

List Price:  $16.00
$13.50
 per 
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!