W10195622 Dishwasher Dish rack Stop Clip Replaces WPW10195622
- Sku:
- W10195622
- Vendor:
- XPARTCO
Have a question?
W10195622 Dishwasher Dish rack Stop Clip Replaces WPW10195622
W10195622 Dishwasher Dish Rack Stop Clip Replaces WPW10195622
The XPARTCO W10195622 is an aftermarket replacement upper dishrack stop clip for Whirlpool dishwashers, and also fits select Jenn-Air, Kenmore, KitchenAid, and Amana models. This small plastic clip mounts at the back end of the upper dishrack's slide rail, preventing the rack from sliding in too far and striking the rear wall of the dishwasher cabinet, or from coming off the track entirely when pulled out.
Light gray in color, measuring approximately 1-1/4" wide, and sold individually — one clip works for either the left or right side of the upper rack. Over time, the plastic can crack or break from repeated use, allowing the rack to slide too far or come loose from its track. A broken stop clip typically shows up as the upper rack sliding out too far, coming off the rails, or falling when pulled forward. It directly replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071.
Quick Answer
The W10195622 Dishwasher Dish Rack Stop Clip fixes Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers where the upper rack slides too far, comes off the rails, or falls out when pulled forward. Light gray, approx. 1-1/4" wide, sold individually. Replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071. This clip is sold individually — if both the left and right stops need replacing, order two.
Common Problems This Part Fixes
- Upper dishrack slides in too far and hits the rear wall of the cabinet
- Upper dishrack comes off the slide rail when pulled forward
- Upper dishrack falls out of the dishwasher
- Broken or missing stop clip visible at the back of the track
- Rack rollers coming out of the track
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher dish rack stop clip directly replaces the following OEM and cross-reference part numbers:
WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This stop clip is compatible with select Whirlpool dishwashers, and also fits select Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers built on the Whirlpool platform, including model numbers such as WDT710PAHZ, WML35011KB, WVU7130JS, KUDC10FXSS5, KUDE40FXBL1, WDT790SAYM1, 7WDT770PAYM0, 7WDT770PAYM1, 7WDT770PAYW0, 7WDT790SAYM0, and WDF730PAYB0.
Note: This clip mounts at the back end of the slide rail/drawer track (a related but separate part, WPW10195623). Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
- Aftermarket replacement upper dishrack stop clip
- Resolves "rack slides too far," "comes off the rails," and "rack falls out" symptoms
- Light gray, approximately 1-1/4" wide
- Works for either the left or right side of the upper rack
- Snap-fit installation — no screws required
- Sold individually
- Replaces WPW10195622, W10195622, WPW10195622VP, 1872168, AP6016778, AWP49232, EAP11750071, PD00002724, PS11750071
- Compatible with Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers
- Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
| Part Number | W10195622 |
| OEM Part Number | WPW10195622 |
| Part Type | Dishwasher Upper Dishrack Stop Clip |
| Condition | Aftermarket Replacement |
| Color | Light Gray |
| Width | Approx. 1-1/4" |
| Fits | Left or right side (universal for either) |
| Related Part | WPW10195623 slide rail/drawer track (sold separately) |
| Repair Difficulty | Easy — basic hand tools, novice repair experience |
| Quantity | 1 stop clip (sold individually) |
| Compatible Brands | Whirlpool, Jenn-Air, Kenmore, KitchenAid, Amana |
Installation Notes
Frequently Asked Questions
My upper rack fell out of the dishwasher. Is this the part I need?
Yes, this is a well-documented symptom of a broken stop clip. One customer described exactly this: "Plastic stop on upper dishwasher rack was broken allowing the rack to come out and fall," and resolved it by prying out the old, broken clip and snapping in a new one in just a few minutes.
Do I need one clip or two?
This part is sold individually, and one clip works for either the left or right side of the upper rack. If both the left and right stop clips need replacing, you'll need to order two.
Do I need to screw this in, or does it snap into place?
This clip snaps into place rather than being screwed in. A flathead screwdriver is useful for prying out the old, damaged clip, but installing the new one is a simple snap-fit into the track — no screwing required.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the size, color, and snap-fit mounting of the original WPW10195622 stop clip used in compatible Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Amana dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.