- Sku: 661570V
661570V Dryer Genuine OEM Drum Belt
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
When a Whirlpool-platform dryer stops tumbling, the drum belt is the first suspect. The 661570V is a genuine OEM multi-rib drive belt that wraps around the drum, routes under a spring-loaded idler pulley, and connects to the motor shaft. If the motor hums and runs but the drum sits still, the belt has almost certainly snapped — open the top panel and you will likely find the broken belt lying in the bottom of the cabinet. If the drum turns but thumps or slips intermittently, the belt has stretched or the ribs have glazed over, and the idler can no longer maintain enough tension to keep the belt from slipping under load.
Before ordering, confirm that the belt is the failed component and not the idler pulley or the motor itself. With the dryer unplugged and the top panel off, check whether the belt is visibly broken, cracked, or hanging loose around the drum. If the belt is intact and still taut, try spinning the drum by hand — a seized drum roller or a locked-up idler pulley can prevent the drum from turning even with a good belt. If the drum spins freely by hand and the belt looks worn but unbroken, the motor coupling or motor itself may be the issue. A broken or missing belt is the most common cause by a wide margin, but ruling out the other components takes only a minute of visual inspection.
If your dryer motor runs but the drum does not spin — or the belt is visibly broken, cracked, or hanging loose inside the cabinet — the 661570V is the direct replacement. If the drum thumps or squeals but still turns, the belt is stretched and needs to be replaced before it snaps completely. If the belt looks intact and taut but the drum still does not turn, check the idler pulley and drum rollers before ordering.
- Motor runs but the drum does not rotate at all
- Broken belt visible inside the dryer cabinet
- Thumping or rhythmic slapping noise from a slipping belt
- Squealing at startup that fades once the drum reaches speed
- Dryer shuts off immediately after starting (belt switch interlock on some models)
The 661570V is Whirlpool's current part number for this dryer drum drive belt. It supersedes the earlier 661570 and 3387610 and is cross-referenced under the following distributor catalog numbers.
COMPATIBILITY
This genuine OEM drum belt fits a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, and Magic Chef dryers and washer/dryer combos. Whirlpool uses this belt design across many dryer platforms. Confirm your model number before ordering.
Compatible brands: Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, Magic Chef
- Genuine OEM Whirlpool dryer drum drive belt — factory original, not aftermarket
- 93-1/2 inches long, 1/4 inch wide — exact OEM specification
- 4 ribs with 3 grooves for secure drum grip
- High-strength rubber construction resists heat fatigue and stretching
- Routes around the drum, under the idler pulley, and onto the motor shaft
- Moderate installation — 30 to 60 minutes with basic hand tools
| Part Number | 661570V |
| OEM Part Number | 661570V |
| Condition | New |
| Brand | Whirlpool |
| Part Type | Dryer Drum Drive Belt |
| Appliance Type | Dryer / Washer Dryer Combo |
| Belt Length | 93-1/2 inches |
| Belt Width | 1/4 inch |
| Ribs | 4 ribs / 3 grooves |
| Material | Rubber |
| Color | Black |
| Compatible Brands | Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and others |
| Supersedes | 661570, 3387610 |
Unplug the dryer or shut off the circuit breaker before beginning any work. For gas dryers, also close the gas supply valve behind the unit. Accessing the belt requires removing the top panel, front panel, and partially or fully lifting the drum. Disconnect the door switch wiring before removing the front panel. When routing the new belt, the ribbed side faces the drum and the smooth side rides on the idler and motor pulleys. Make sure the belt is centered on the drum and properly seated in the idler pulley groove before reassembling. Run a brief tumble cycle to verify smooth, quiet drum rotation.
Have a question?

661570V Dryer Genuine OEM Drum Belt

