Skip to product information
Sale
  • Sku: 5303281153

5303281153 Dryer Genuine OEM Rear Drum Bearing

List Price:  $48.00
$39.80
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

5303281153 Dryer Rear Drum Bearing Kit — Genuine OEM

Product Description

When a Frigidaire-manufactured dryer starts making a squealing or grinding noise, the rear drum bearing is one of the first components to investigate. The dryer drum is supported at the rear by a ball-and-socket bearing and at the front by glide strips or a felt seal. If the noise is coming from behind the drum — particularly a high-pitched squeal that may be loudest when the dryer first starts and softens as it heats up — the rear bearing is the most likely cause. A worn bearing allows the ball shaft on the drum to drag against the socket, producing metal-on-metal contact.

To confirm the bearing before ordering, unplug the dryer and open the door. Reach in and slowly rotate the drum by hand. A healthy bearing allows the drum to spin freely with minimal resistance. If you feel a rough, gritty, or catching sensation as you rotate — especially toward the rear — the bearing is worn. You may also hear a scraping sound during this test. If the drum wobbles or sags at the back when you push down on it, the bearing socket or ball shaft has worn through. Dark scuff marks or streaks on clothes after drying are another sign — this happens when the sagging drum contacts the inside of the cabinet during tumbling.

Quick Answer

How Do You Narrow Down a Noisy Dryer?

A noisy dryer has three main moving parts that produce noise when worn: the drive belt, the idler pulley, and the rear drum bearing. A worn belt usually produces a thumping or rhythmic slapping sound and may eventually snap, stopping the drum entirely. A failing idler pulley typically makes a rattling or high-pitched whine and the noise changes when belt tension shifts. A worn rear drum bearing produces a steady squeal or grinding that comes from behind the drum and often worsens over weeks. If the noise is a continuous squeal from the rear of the machine that gets louder over time, the 5303281153 rear drum bearing kit is the most likely fix.

Common Symptoms

  • High-pitched squealing or grinding noise from the rear of the dryer
  • Noise that is loudest at startup and may soften slightly as the dryer heats
  • Rough or gritty resistance when spinning the drum by hand
  • Dark scuff marks or streaks on clothes from the drum contacting the cabinet
  • Drum not spinning or turning with excessive resistance

Replaces Part Numbers

The 5303281153 is Frigidaire's current production number for the rear drum bearing kit. It is the latest revision in a line of superseded bearing assemblies and replaces the following part and catalog numbers.

5303281153 replaces 1851, 3281153, 5304459240, 85-852, AH459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 3281019, 3281020, 5303281009, 5303286875, 8015113, 8015324, 902088, Q000022224, Q000500537, WQ22224, WQ500537, AFR17081, AP2142648, DE724, EA459829, EAP459829, PD00000097, PS459829

Compatibility & Model Cross Reference

This genuine OEM bearing kit fits Electrolux-manufactured dryers sold under multiple brand names. Confirm your model number before ordering.

Frigidaire: AEQ7000ES0, LEQ6000ES2, FGQ1442ES3, GLEQ2170KS1

Electrolux: EIED50LIW0, EIMED60LT3

Kenmore: 417.99570150, 417.97912510 (417-prefix models)

Gibson: DE27S6WPMC

Kelvinator / Crosley / White-Westinghouse / Tappan: Select dryer models

This is a partial list of sample models. Kenmore dryers with a 417-prefix model number are manufactured by Electrolux/Frigidaire and use this bearing platform. Always confirm your full model number before ordering.

Key Features

  • Genuine OEM Frigidaire rear drum bearing kit — complete ball-and-socket assembly
  • Kit includes bearing, ball shaft, ball bearing (grounding), ball bearing retainer, and mounting screws
  • High-temperature lubricant included for proper installation
  • Alloy steel and engineered plastic construction for durability under heat
  • Direct fit for Electrolux-manufactured dryers — Frigidaire, Kenmore 417-prefix, Gibson, and more
  • Rated easy difficulty — most replacements completed in 30 minutes to 2 hours

Product Specifications

Part Number 5303281153
Condition New
Brand Frigidaire
Part Type Rear Drum Bearing Kit (Ball-and-Socket)
Appliance Type Dryer, Washer Dryer Combo
Material Alloy steel and engineered plastic
Kit Includes Bearing, ball shaft, ball bearing, ball bearing retainer, high-temperature lubricant, screws
Bearing Dimensions Approximately 1-15/16" L × 1" W × 1-3/8" H
Mounting Holes 1-1/2" apart (center to center)
Weight Approximately 7 oz

Installation & Safety Notes

Safety Warning
Disconnect the dryer from electrical power before beginning — unplug it or shut off the circuit breaker. If the dryer is gas, also shut off the gas supply valve. The drum must be removed to access the rear bearing, which requires removing the top panel, front panel, and drive belt. Note the belt routing path before removing it. The mounting holes in the metal bearing plate are not pre-threaded — use the self-tapping screws included in the kit. Apply the included high-temperature lubricant to the bearing socket before reassembly. Do not omit the grounding ball from between the bearing plate and the rear cabinet wall.

Frequently Asked Questions

How can I tell if the noise is the rear bearing versus the idler pulley?
The idler pulley and rear bearing can both squeal, but they produce different sounds and are located in different positions. The idler pulley typically produces a rattling or whining noise that changes pitch when the belt tension shifts — you may notice a brief change in the sound right at startup when the motor engages the belt. The rear bearing produces a steadier squeal or grinding that is consistent throughout the cycle and comes distinctly from behind the drum. With the dryer unplugged, spin the drum by hand — a worn bearing will feel gritty or rough. The idler pulley can be checked by pressing on the spring-loaded arm and spinning the pulley wheel — a bad pulley will wobble or feel notchy.
My dryer squeaks but still dries fine. Do I need to replace the bearing now?
A squeaking dryer bearing will not stop drying your clothes immediately, but the noise is a warning that the bearing is wearing through. If left unaddressed, the wear accelerates as lubrication fails and metal contacts metal. Eventually the ball shaft can wear a groove into the bearing socket, causing the drum to sag and rub against the cabinet — which produces scuff marks on clothing and can damage the drum or cabinet. In extreme cases, the drum may seize or the extra drag can overload and break the drive belt. Replacing the bearing at the first sign of squealing prevents these secondary failures.
Does this bearing kit work on both gas and electric dryers?
Yes. The rear drum bearing is a mechanical component that is the same on both gas and electric versions of the same dryer model. The 5303281153 fits both gas and electric Electrolux-manufactured dryers. The only difference in the repair is that gas dryers require shutting off the gas supply valve before beginning, in addition to disconnecting electrical power.
What tools do I need for this repair?
The basic tool set is a 1/4" or 5/16" nut driver (depending on model), a Phillips screwdriver, and a flat-blade screwdriver. Some models may also require pliers to release spring clips or a socket set for panel screws. No specialized tools are required. A smartphone or camera to photograph the belt routing before removal is helpful for reassembly.
Can I test or inspect the bearing without fully disassembling the dryer?
You can get a strong indication without full disassembly. With the dryer unplugged and the door open, reach in and slowly rotate the drum by hand. If the drum turns smoothly with minimal resistance, the bearing is likely still in good condition. If you feel gritty resistance, rough spots, or hear a scraping sound as you rotate — particularly when you push downward on the drum — the bearing is worn. For a visual inspection, remove the top panel (usually two screws at the rear plus spring clips at the front) and look down at the rear of the drum while rotating it — you may see visible wear, missing lubricant, or the ball shaft sitting off-center in the socket.
Genuine OEM Part Fast Shipping Easy Installation
View full details
5303281153 Dryer Genuine OEM Rear Drum Bearing  Parts-O-Matic

5303281153 Dryer Genuine OEM Rear Drum Bearing

List Price:  $48.00
$39.80
 per 
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!