- Sku: 4392067
4392067 Dryer Genuine OEM Repair Kit Belt, Rollers & Idler
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
A noisy dryer is almost always telling you that one of three mechanical components is wearing out: the drive belt, the drum support rollers, or the idler pulley. Each failure sounds different, and identifying the right noise before you open the cabinet saves time and confirms the 4392067 repair kit covers your problem. A high-pitched squeal or screech that runs continuously while the drum turns points to the belt slipping on the drum surface or the idler pulley bearing drying out. A rhythmic thumping or low rumble — especially one that seems to come from the back of the machine — means one or more drum support rollers have flat-spotted or their bearings are shot. And if the motor runs (you hear a hum or buzz) but the drum does not spin at all, the belt has snapped.
Before ordering, you can narrow the diagnosis with two quick tests. First, open the door and spin the drum by hand. If you feel thumps, catches, or rough spots during hand rotation, the rear drum rollers are worn — the drum should glide smoothly. If it spins freely by hand but will not turn under motor power, the belt is broken. Second, listen to where the noise comes from during a running cycle: front-of-dryer squealing usually points to the idler pulley (which sits at the front-bottom near the motor), while rear thumping points to the rollers. The 4392067 kit replaces all three components, so if you hear more than one noise or are not sure which part is failing, the kit covers the entire mechanical drive path in a single repair.
If your dryer squeals (belt or idler), thumps (rollers), or the drum will not spin at all (broken belt), the 4392067 kit replaces all three wear components at once. Spin the drum by hand with the door open: rough spots or catches mean the rollers are worn; if it spins freely but will not turn under motor power, the belt is broken. If the dryer is making noise and you are not certain which part is the cause, this kit covers the full drive system.
- High-pitched squeal or screech during tumbling (belt slipping or idler bearing worn)
- Rhythmic thumping or rumbling from the rear of the dryer (flat-spotted drum rollers)
- Motor hums or buzzes but the drum does not turn (belt snapped)
- Dryer starts briefly then shuts off (belt broken, belt-switch interlock tripped)
- Drum rotation feels rough, uneven, or catches when spun by hand
The 4392067 is Whirlpool's part number for this dryer repair kit. The retail-packaged version is sold as 4392067RC. The included component part numbers and all known cross-references are listed below.
COMPATIBILITY
This genuine OEM repair kit fits most 27-inch-wide dryers across the Whirlpool family, including Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Crosley, Inglis, Admiral, Magic Chef, Norge, Roper, and Estate. It also fits Whirlpool-platform thin-twin stackable units. Confirm your model number before ordering.
Sample compatible models: WED5620HW, WED7300DW0, WED8500DW0, WED9600TW0, MEDC465HW, MEDC215EW, MEDX655DW, GEW9200LW0, GEW9250PW0, YMEDB955FC1
- Genuine OEM Whirlpool dryer repair kit — factory-original components, not aftermarket
- Complete kit: 1 drive belt (661570V, 93-1/2"), 4 drum rollers, 1 idler pulley assembly
- Also includes 9 tri-ring retainers, 1 clip, and printed instructions
- Replaces the three components that cause nearly all dryer noise and drum-spin failures
- Fits 27-inch-wide dryers across 13+ Whirlpool-family brands
- Made in USA — covers the full mechanical drive path in one repair
| Part Number | 4392067 |
| Condition | New |
| Brand | Whirlpool |
| Part Type | Dryer Repair Kit (Belt, Rollers & Idler) |
| Appliance Type | 27-Inch Dryer |
| Belt Included | 661570V — 93-1/2" multi-rib, 4 ribs |
| Rollers Included | WPW10314173 — 4 drum support rollers |
| Idler Included | 279640 — idler pulley assembly |
| Also Includes | 9 tri-ring retainers, 1 clip, instructions |
| Compatible Brands | Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, and others |
| Supersedes | 2015, 80047 |
Unplug the dryer or shut off the breaker before beginning any work. For gas dryers, close the gas supply valve behind the unit before disconnecting power. This repair requires removing the top panel, front panel, and drum to access all three components. Disconnect the door switch wiring harness before pulling the front panel away. Support the drum when lifting it out — it is heavy and can tip forward. When routing the new belt, the ribbed side faces the drum and the smooth side rides on the idler pulley and motor shaft. Confirm the belt is not twisted and the tri-ring retainers are fully snapped onto each roller shaft before reassembling.
Have a question?

4392067 Dryer Genuine OEM Repair Kit Belt, Rollers & Idler

