Choice 37001042 Dryer Drum Roller Replaces WP37001042
- Sku:
- 37001042CM
- Vendor:
- Choice Manufactured Parts
Have a question?
Choice 37001042 Dryer Drum Roller Replaces WP37001042
37001042 Dryer Drum Roller Replaces WP37001042
Aftermarket rear drum support roller for select Amana, Maytag, Admiral, Crosley, Speed Queen, Magic Chef, Kenmore and Whirlpool-built dryers.
Product Overview
The 37001042 Dryer Drum Roller supports the rear of the dryer drum and allows the drum to rotate smoothly during operation.
This quality aftermarket replacement is designed to replace Whirlpool/Maytag part WP37001042 and related earlier roller numbers.
Quick Answer
This listing is for one drum support roller. The roller is approximately 3 inches in diameter. Because paired rollers wear together, replacing both support rollers at the same time is commonly recommended for even support and quieter operation.
Common Problems This Part May Fix
- Squealing, thumping or rumbling while the dryer runs
- Drum feels rough or uneven while turning
- Flat-spotted, cracked or worn roller surface
- Excessive drum movement
- Dryer drum does not rotate smoothly
Replaces and Cross-References
Cross-reference numbers are provided for identification only. This is an aftermarket replacement and is not a Genuine Whirlpool OEM part.
Compatibility
Fits select Amana, Maytag, Admiral, Crosley, Speed Queen, Magic Chef, Kenmore and Whirlpool-built dryers. Compatible model examples include:
Important: This is only a partial compatibility list. Verify the complete dryer model number and original roller number before ordering.
Key Features
- Quality aftermarket drum support roller
- Supports the drum during rotation
- Approx. 3-inch outside diameter
- Rubber roller surface with center bearing/bushing
- Sold individually
- Recommended to inspect or replace both rollers together
Product Specifications
| Part Number | 37001042 |
| Replaces | WP37001042 |
| Part Type | Dryer Drum Support Roller |
| Condition | New |
| Part Quality | Aftermarket Replacement |
| Approx. Diameter | 3 in. |
| Package Quantity | 1 Roller |
| Application | Rear Drum Support |
Installation Notes
- Disconnect electrical power and, for gas dryers, shut off the gas supply before service.
- Access the drum support rollers according to the dryer service procedure.
- Inspect the roller shaft, retaining ring and both support rollers for wear.
- Install the replacement roller with the correct spacers/retainers in their original positions.
- Rotate the drum by hand before reassembly to verify smooth movement.
Service tip: A noisy dryer can also be caused by the idler pulley, belt, blower wheel, motor bearings, or worn roller shafts. Inspect the complete drum-support system while the dryer is open.
Frequently Asked Questions
Is this listing for one roller or two?
One drum support roller is included.
Should I replace both dryer rollers?
Manufacturers and parts suppliers commonly recommend replacing both support rollers together for even wear and support.
Does this replace WP37001042?
Yes. This aftermarket roller is designed to replace WP37001042 and related earlier numbers listed above.
Is this a Genuine Whirlpool OEM part?
No. This listing is for a quality aftermarket replacement.
Shop With Confidence
Verify your complete dryer model number before ordering. Matching the original roller number is the best way to confirm fitment.