- Sku: 341241
341241 Dryer Genuine OEM Drum Belt
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
When a dryer stops tumbling, the drum belt is the first thing to check. The 341241 is a genuine OEM drum belt from Whirlpool, and a broken belt is the single most common reason a dryer drum will not spin. The diagnostic is straightforward: if you open the dryer door and the drum turns freely by hand with almost no resistance, the belt is broken. An intact belt creates noticeable drag because the idler pulley spring maintains tension on the loop. No drag means no belt — and the 341241 is the replacement.
Before ordering, it helps to rule out the other causes of a non-spinning drum. If the drum has resistance when you turn it by hand, the belt may still be intact and the problem could be a seized drum roller, a locked-up idler pulley, or a failed motor. If the dryer does nothing at all — no motor hum, no heat, nothing — the issue is electrical, not mechanical. But in most cases where the motor hums normally and the drum sits still, a snapped belt is the answer. This belt fits both gas and electric models across Whirlpool, Kenmore, Maytag, Amana, Roper, and several other brands under the Whirlpool Corporation umbrella.
If the motor runs but the drum does not turn, open the door and spin the drum by hand. Spins freely with no resistance? The belt is broken and the 341241 is the fix. If the drum has heavy resistance or won't turn by hand, check the drum rollers and idler pulley first. This genuine OEM belt is 92-1/4" × 1/4" with 4 ribs and fits Whirlpool-family dryers. Medium difficulty, about 30–60 minutes.
- Motor runs but the drum does not spin
- Drum spins freely by hand with no tension or resistance
- Squealing noise that gets worse over time, then drum stops
- Drum turns intermittently — spins on light loads, stalls on heavy ones
- Visible pieces of broken belt inside the dryer cabinet
The 341241 is the current Whirlpool part number for this dryer drum belt. It supersedes several earlier Whirlpool numbers and is cross-referenced under numerous distributor catalog numbers from various parts suppliers.
COMPATIBILITY
This genuine OEM drum belt fits select dryers from Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley, Estate, Inglis, KitchenAid, Admiral, Norge, and Magic Chef — both gas and electric models. Confirm your model number before ordering.
Sample compatible models: WED4815EW1, NED4655EW1, LGR8648LW0, GEQ8858HQ1, RED4440VQ1, 110.67032600, 110.78712890, 110.86861000, GEN2000HQ1, LG6811XSN0
- Genuine OEM Whirlpool dryer drum belt — factory original, not aftermarket
- 4-rib, 3-groove profile for positive drum grip without slipping
- 92-1/4" length × 1/4" width — exact factory specification
- High-heat rubber/elastomer compound withstands continuous dryer operating temperatures
- Compatible across 12+ brands under the Whirlpool Corporation family
- Medium difficulty installation — approximately 30 to 60 minutes with a Phillips screwdriver and work gloves
| Part Number | 341241 |
| OEM Part Number | 341241 |
| Condition | New |
| Brand | Whirlpool |
| Part Type | Dryer Drum Drive Belt |
| Appliance Type | Dryer |
| Belt Length | 92-1/4" (92.25 inches) |
| Belt Width | 1/4" |
| Rib Count | 4 ribs, 3 grooves |
| Material | Rubber / Elastomer |
| Color | Black |
| Supersedes | 349533, 345473 |
Unplug the dryer or shut off the breaker before opening the cabinet. For gas models, close the gas supply valve behind the unit before disconnecting power. The idler pulley spring is under tension — release it carefully and keep fingers clear of the spring mechanism. While the cabinet is open, inspect the idler pulley for free spin and check each drum roller for flat spots. Replacing the belt over a seized pulley or worn roller will cause the new belt to fail prematurely.
Have a question?

341241 Dryer Genuine OEM Drum Belt

