- Sku: 316530101
316530101 Range Genuine OEM Infinite Switch for Hyper Element
BEST PRICE
We back all products with a 1 year guarantee.
FREE SHIPPING
No code needed, just head for checkout!
This is a demonstration store. You can't purchase this product.
The 316530101 is the Genuine OEM infinite switch for the hyper element surface burner on select Frigidaire and Kenmore electric ranges. When a burner stops responding to its knob — staying on full heat, refusing to heat at all, or producing erratic output — the infinite switch is the first component to suspect. It sits directly behind the control knob and is the only component that translates knob position into actual heat output at the element.
Before ordering a replacement, it's worth ruling out the simpler causes: a tripped circuit breaker leg (a range on 240V can lose half its power and still turn on some functions), and the element itself. If the element coil shows a visible break or reads open on a multimeter, replace the element first. If the element checks out and the burner symptom is a heat control problem rather than no heat at all, the switch is the correct diagnosis. The 316530101 is specific to the hyper (dual-zone) element — do not substitute a standard single-element switch, which will not handle the hyper element's load correctly.
Replace this switch if your hyper element burner stays on full heat, won't turn on, or won't hold a set temperature. Confirm the element itself is intact before ordering. Part Number: 316530101 — Genuine OEM Frigidaire, hyper element.
- Hyper element burner stays on full heat regardless of knob setting
- Burner won't heat after turning the knob to any position
- Burner cycles on and off with no consistent heat output
- Outer ring of hyper element won't activate at higher settings
- Knob turns freely but burner doesn't respond
- Burning smell or discoloration at the control panel area
316530101, 2210875, AFR16377, AH3506352, AP5330876, EA3506352, EAP3506352, OEM15992637, PD00055047, PS3506352
Fits select Frigidaire and Kenmore electric ranges with hyper element (dual-zone radiant) burners. Verify your model number before ordering.
- Genuine OEM Frigidaire part — rated for hyper element dual-zone load
- Bimetallic strip mechanism provides infinitely variable heat control
- Manages both inner coil and outer ring activation
- Direct plug-in replacement — no wiring modification required
- Restores accurate knob-to-heat-output response
- Fits select Frigidaire and Kenmore electric ranges
| Part Number | 316530101 |
| OEM Part Number | 316530101 |
| Condition | Genuine OEM |
| Part Type | Infinite Switch — Hyper Element |
| Appliance Type | Electric Range |
| Brand | Frigidaire |
| Dimensions | 6.7"L × 5.8"W × 4.8"H |
| Weight | 0.49 lbs |
| Compatible Brands | Frigidaire, Kenmore |
Have a question?
316530101 Range Genuine OEM Infinite Switch for Hyper Element
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.