241798231 Refrigerator Genuine Ice Maker
- Sku:
- 241798231
- Vendor:
- Frigidaire
Have a question?
241798231 Refrigerator Genuine Ice Maker
241798231 Genuine OEM Frigidaire Refrigerator Ice Maker
The 241798231 is a genuine Frigidaire OEM ice maker assembly for Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators. This 8-cube ice maker receives water from the refrigerator's water inlet valve, holds it in a mold, and freezes it into cubes. Once frozen, an internal mechanism ejects the cubes into the ice bucket below, and the cycle repeats automatically until the bucket is full — at which point a bail arm or sensor tells the ice maker to stop producing more.
This assembly ships complete with its cover, wire harness, bail arm, and installation hardware, terminating in a 5-pin connector for a direct plug-in fit. Measuring approximately 11-3/4"L x 4-5/8"W x 4-3/4"H, with a harness and plug that run about 18" and a bail arm measuring 9-3/8"L x 1/8"W x 4-1/8"H. Over time, the plastic mold where the ice cubes actually form can flake, crack, or corrode, and internal mechanical components can wear out or fail electrically. If your ice maker's mold shows flaking or corrosion, or the unit has simply stopped producing ice, it's time for a new assembly rather than attempting a partial repair. It directly replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, and PS12364147.
Quick Answer
The 241798231 Genuine OEM Frigidaire Refrigerator Ice Maker fixes Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators that have stopped making ice, or where the ice mold is visibly flaking or corroded. 8-cube ice maker with cover, wire harness, bail arm, and installation hardware included. 5-pin connector. Replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, PS12364147. This is not a universal part — always verify your exact model number before ordering.
Common Problems This Part Fixes
- Ice maker has stopped producing ice entirely
- Ice maker producing far less ice than it used to
- Ice mold visibly flaking, cracking, or corroded
- Ice cubes coming out misshapen, small, or inconsistent
- Ice maker cycling but never ejecting cubes into the bucket
- Ice maker that runs constantly without ever reaching a full bucket and stopping
- Ice maker that hums or makes noise but doesn't complete a cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator ice maker directly replaces the following OEM and cross-reference part numbers:
241798231, 241798224, 5304456672, 241798201, 5304456671, 241642501, 241642503A, 241642511, 241798209, 241798211, 241798220, 3206327, 3206329, 4591526, 5303320545, 5304445222, 5304456669, 75304445222, 75304456669, 75304456671, 75304456672, AP6332951, AFR14980, PD00044512, PS12364147.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This ice maker is compatible with select Frigidaire refrigerators, and also fits select Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators built on the same platform, including model numbers such as FFSS2315TS0.
Note — not a universal part: This ice maker is model-specific despite the broad cross-reference list above. Always verify your full model number before ordering rather than assuming fit based on a general brand match. Contact our support team with your model number if you're unsure.
Key Features
- Genuine Frigidaire OEM part — factory-specified mold design and cycling mechanism
- Complete assembly — includes cover, 4-wire harness, bail arm, and installation hardware
- Produces 8 radius ice cubes per cycle
- Resolves "not making ice," "flaking or corroded mold," and "misshapen cubes" symptoms caused by ice maker failure
- 5-pin connector for a direct plug-in electrical fit
- Dimensions: 11-3/4"L x 4-5/8"W x 4-3/4"H; harness/plug approx. 18"L; bail arm 9-3/8"L x 1/8"W x 4-1/8"H
- Direct drop-in replacement — no modification required
- Replaces AP6332951, 3206327, 3206329, 241642501, 241642503A, 241642511, 241798201, 241798209, 241798211, 241798220, 241798223, 241798224, 5303320545, 5304445222, 5304456669, 5304456671, 5304456672, EAP12364147, PD00044512, PS12085911, and PS12364147
- Compatible with Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, and Westinghouse refrigerators
- Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
| Part Number | 241798231 |
| Part Type | Refrigerator Ice Maker Assembly |
| Condition | Genuine OEM |
| Brand | Frigidaire |
| Ice Output | 8 radius cubes per cycle |
| Kit Contents | Ice maker, cover, 4-wire harness, bail arm, installation hardware |
| Electrical Connector | 5-pin |
| Color | White / Black / Gray |
| Material | Plastic / Metal |
| Dimensions | 11-3/4"L x 4-5/8"W x 4-3/4"H |
| Harness/Plug Length | Approx. 18" |
| Bail Arm Dimensions | 9-3/8"L x 1/8"W x 4-1/8"H |
| Quantity | 1 ice maker assembly |
| Compatible Brands | Frigidaire, Electrolux, Kenmore, Crosley, Gibson, Kelvinator, Tappan, Westinghouse |
Installation Notes
Frequently Asked Questions
My ice maker's mold looks flaky or corroded. Should I replace the whole assembly?
Yes. The ice mold is not a separately serviceable component on this assembly — if it's flaking, cracking, or corroded, that's a sign the assembly has reached the end of its service life and the complete unit should be replaced rather than repaired.
My ice maker runs but never stops, or never seems to sense a full bucket. What does that mean?
This can point to a failure in the bail arm or the internal sensing mechanism that tells the ice maker the bucket is full and it's time to pause production. Since the bail arm is included with this complete assembly, replacing the whole unit resolves this along with any other underlying cycling issues, rather than trying to source and repair that mechanism separately.
The listing says this isn't a universal part even though it has a long cross-reference list. What does that mean for me?
The long list of replaced part numbers reflects that this same physical assembly has been sold under many different numbers over the years and across related brands (Electrolux, Kenmore, Crosley, and others built on the same Frigidaire platform) — it does not mean this ice maker fits every refrigerator. Always confirm your specific model number before ordering, since visually similar ice makers can differ in ways that affect fit.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It includes the same mold design, wire harness, bail arm, and mounting configuration as the ice maker assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.