- Sku: 134120900
134120900 Dryer Genuine OEM Thermal Fuse
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
134120900 Dryer Thermal Fuse (220°F Thermal Limiter) — Genuine OEM
Product Description
The 134120900 Genuine OEM thermal fuse is the factory-specified safety limiter for Electrolux-manufactured dryers sold under the Frigidaire, Kenmore, Gibson, Kelvinator, Tappan, Crosley, and Westinghouse brands. When your dryer suddenly stops running or loses heat, a blown thermal fuse is one of the most common causes — and one of the easiest to diagnose with a basic multimeter. This guide walks you through how to confirm the fuse is the problem before you order a replacement.
A working thermal fuse is a closed circuit — electricity passes through it freely. When exhaust temperatures exceed 220°F, the internal element melts and permanently opens the circuit. Depending on the model's wiring, this may kill power to the entire machine or may only disable the heating element while the motor still runs. The fuse cannot be reset or repaired; it must be replaced. But before swapping the fuse, diagnosing the root cause — usually restricted venting — is the most important step to prevent repeat failure.
Quick Answer
Is Your Thermal Fuse the Problem?
If your dryer is completely dead despite having power at the outlet, or runs but produces no heat, the thermal fuse may have blown. You can confirm this with a simple continuity test: remove one wire from the fuse terminals, set your multimeter to continuity or the lowest ohms scale, and touch a probe to each terminal. A good fuse shows continuity (a tone or near-zero reading). No continuity means the fuse has blown and needs to be replaced. A visual inspection may also show discoloration or a broken internal link.
Common Symptoms
- Dryer completely dead — no tumble, no heat, no response
- Dryer runs but produces no heat at all
- Dryer was running excessively hot before it stopped
- Dryer shuts off after a few minutes of operation
- Clothes come out damp after a full-length cycle
Replaces Part Numbers
The 134120900 is the current Frigidaire production number and replaces all earlier versions of this thermal fuse. The following part numbers from various distributors and catalogs all cross-reference to this same component.
Compatibility & Model Cross Reference
This thermal fuse fits Electrolux-manufactured gas and electric dryers sold under multiple brands. Confirm your model number before ordering.
Frigidaire: GLEQ2152ES0, GLEQ2152EE1, GLEQ332AS1, GLEQ642CAS0, GLER341AS2, GLER642AS1, GLER104FSS0, GLGQ2152EE3
Kenmore (417-prefix): 41781042000, 41781052000, 41780412700, 41780042991, 41769052990, 41764182300, 41761722511, 41782042102
Gibson: DE27S6WTMA, DG27S6FTMA
Kelvinator: DGS100CD1
This is a partial list of sample models. Kenmore dryers with a 417-prefix model number are built by Electrolux and use the same thermal fuse. Always confirm your full model number before ordering.
Key Features
- Genuine OEM Frigidaire replacement — exact factory fit and electrical rating
- 220°F thermal limit — calibrated to trip before cabinet temperatures become dangerous
- Non-resettable, single-use design — provides fail-safe overheating protection
- Compatible with both gas and electric Electrolux-manufactured dryers
- Installs on the blower housing or near the heating element assembly
- Compact plastic-and-metal construction — matches original dimensions precisely
Product Specifications
| Part Number | 134120900 |
| Condition | New |
| Brand | Frigidaire |
| Part Type | Thermal Fuse (Thermal Limiter) |
| Temperature Rating | 220°F |
| Appliance Type | Dryer (Gas and Electric) |
| Material | Plastic and Metal |
| Resettable | No — single-use, must be replaced once tripped |
| Location | Blower housing or heating element area |
Installation & Safety Notes
Unplug the dryer or disconnect the circuit breaker before beginning any repair. For gas dryers, also close the gas shutoff valve. Never bypass a thermal fuse — it is a critical fire-safety device that serves as the last line of defense against dryer fires. Before installing the new fuse, inspect and clean the entire vent system from the dryer exhaust to the exterior hood to prevent repeat failure.
Frequently Asked Questions
- How can I tell if the thermal fuse is blown without a multimeter?
- While a multimeter continuity test is the most reliable method, you can also look for visual signs. Remove the fuse from the dryer and inspect it closely — a blown thermal fuse sometimes shows darkening, warping, or a visibly broken internal link. However, many blown fuses look perfectly normal on the outside, so a continuity test is the only definitive way to confirm whether the fuse has tripped.
- My dryer tumbles but has no heat — could the thermal fuse be the cause?
- Yes, on some models. The wiring configuration varies between dryer platforms — on some Frigidaire-platform models, a blown thermal fuse kills all power, while on others it only breaks the heating circuit, allowing the motor to run with no heat. A no-heat condition can also be caused by a failed heating element, a defective gas valve coil (gas models), a worn cycling thermostat that is not regulating properly, or a tripped high-limit thermostat — these are separate components from the thermal fuse and each has a different function in the dryer's thermal protection system. Testing the thermal fuse for continuity is a quick first step to narrow down the cause.
- Can a clogged lint screen alone blow the thermal fuse?
- A partially clogged lint screen reduces airflow but usually won't trip the fuse by itself — the cycling thermostat and high-limit thermostat compensate for moderate restrictions by regulating the heating element. However, a fully blocked lint screen combined with a long or restricted vent run can create enough heat buildup to reach the 220°F trip point. The more common scenario is a clean lint screen with a clogged dryer vent duct — the hidden restriction behind the dryer or in the wall is what most often triggers a thermal fuse failure.
- Does this thermal fuse work with both gas and electric dryers?
- Yes. The 134120900 is specified for both gas and electric dryer models manufactured by Electrolux. The thermal fuse monitors exhaust-air temperature regardless of the heat source (electric heating element or gas burner), so the same fuse part number is used across both fuel types within compatible model families.
- What tools do I need to replace the thermal fuse?
- Most Frigidaire-platform dryer thermal fuse replacements require only a Phillips-head screwdriver, a putty knife to release the top panel clips, and needle-nose pliers to disconnect the wire terminals from the fuse. No soldering or special tools are needed. The repair is rated as an easy DIY job with an estimated time of 30 to 60 minutes depending on the model's access path to the fuse location.
Have a question?

134120900 Dryer Genuine OEM Thermal Fuse

