- Sku: 131825900
131825900 Dryer Genuine OEM Drum Bearing Cup
FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.
CHECK YOUR MODEL COMPATIBILITY
Enter your appliance model number to check if this part is listed as compatible.
Need help finding your model number?
131825900 Dryer Rear Drum Bearing Support Cup — Genuine OEM
Product Description
The 131825900 is a genuine OEM rear drum bearing support cup manufactured by Frigidaire for Electrolux-platform dryers. This white plastic cup mounts to the inside of the dryer's rear cabinet panel and serves as the bearing race for the steel ball at the end of the rear drum support shaft. When the cup wears out, the smooth bearing surface is gone and the drum loses its stable rear pivot point — that is when the dryer starts making noise and the problem gets progressively worse if the cup is not replaced.
The rear bearing is one of several components that can produce noise in a dryer, and the symptoms overlap. A worn bearing cup typically produces a squealing or grinding sound that is constant during tumbling and gets louder over weeks or months. This is distinct from a belt squeal (which is often intermittent and pitch-shifts with load), a worn idler pulley (higher-pitched squeak, often with a rhythmic pattern), and worn front drum glides or felt seal (scraping or thumping sound that changes when you push the drum front edge up). The most reliable diagnostic for the bearing cup is a visual inspection: remove the drum and look at the inside of the rear panel where the cup mounts. A worn cup will show a deep groove, discoloration, or may be worn completely through, and you will often find metal filings or dark powder in the area — the result of the steel ball grinding past the plastic and into the metal panel.
Quick Answer
How Do You Diagnose a Worn Bearing Cup?
If your Frigidaire-built dryer has developed a constant squeal or grinding sound during tumbling that has been getting progressively louder, the rear bearing cup is a likely cause. To confirm, unplug the dryer, remove the drum, and inspect the cup mounted to the inside of the rear panel. A worn cup will be visibly grooved, discolored, or worn through entirely. Metal filings or dark residue around the bearing area confirm the ball has worn past the cup into the metal panel. If the cup is worn but the ball bearing surface is still smooth and the shaft has no grooves, the cup alone (this part) is all you need. If the ball is scored or the shaft is damaged, consider the complete rear bearing kit (5303281153) for a full rebuild.
Common Symptoms
- Constant squealing or grinding noise during tumbling that worsens over time
- Rumbling or thumping sound from the rear of the dryer cabinet
- Dark marks or streaks appearing on clothes from metal filings in the drum
- Visible metal filings or dark powder inside the cabinet on inspection
- Drum feels loose or wobbles when pushed from the front opening
Replaces Part Numbers
Frigidaire part number 131825900 is the current manufacturer part number for this rear drum bearing support cup. It supersedes and directly replaces the following earlier and cross-reference numbers.
Compatibility & Model Cross Reference
This genuine OEM bearing cup is used in select Electrolux-manufactured dryers, including gas models, electric models, and stacked laundry centers. Always verify your model number on the manufacturer's parts diagram before ordering.
Frigidaire: GLEQ642AS1, GLER642AS3, GLEQ2152ES0, AEQ6400HE0, FDE336RES1, LEQ6000ES2
Frigidaire (Stacked): FFLE1011MW2, FFLG3911QW1
Gibson: GLET1031CS0, GLET1041AS1, GLGQ332AS1
Kenmore: Select 417-prefix models built on the Electrolux platform
White-Westinghouse: DE250EDV5
Kelvinator: DGS100CD1
This is a partial list of verified sample models — not every model from these brands uses this bearing cup. The same part is also used in select Crosley, Tappan, Universal, and Montgomery Wards dryers. Your model number is typically on a label inside the door opening or on the rear panel. Not sure if this fits your dryer? Send us your model number and we will verify compatibility.
Key Features
- Genuine OEM Frigidaire rear drum bearing support cup (part 131825900)
- White plastic cup mounts to the inside of the rear cabinet panel
- Serves as the bearing race for the rear drum support ball bearing
- Also available as part of the complete rear bearing kit (5303281153)
- Fits both gas and electric dryer models and stacked laundry centers
- Direct replacement — uses existing mounting holes on the rear panel
Product Specifications
| Part Number | 131825900 |
| Condition | New |
| Brand | Frigidaire |
| Part Type | Rear Drum Bearing Support Cup |
| Appliance Type | Dryer / Washer-Dryer Combo |
| Material | Plastic (white) |
| Color | White |
| Related Kit | 5303281153 (complete rear bearing kit) |
| Country of Origin | China |
Installation & Safety Notes
Disconnect power to the dryer before beginning any repair. On gas models, also shut off the gas supply valve. Accessing the rear bearing cup requires removing the drum from the cabinet — the specific procedure varies by model (front-access or rear-access). Wear work gloves when handling the drum and internal components. Before installing the new cup, clean all lint, metal filings, and debris from inside the cabinet. Apply high-temperature bearing lubricant to the inside surface of the new cup before seating the ball bearing. Reassemble in reverse order and confirm smooth, quiet drum rotation by hand before restoring power.
Frequently Asked Questions
- How do I tell if the noise is the bearing cup and not the belt or idler pulley?
- A worn bearing cup produces a constant squeal or grind that runs the entire tumble cycle and gets louder over weeks or months. A worn belt typically squeals intermittently — often at startup or when the drum is loaded heavily — and the pitch changes with load. A worn idler pulley produces a higher-pitched squeak that often has a rhythmic pattern corresponding to the pulley rotation. Worn front drum glides produce a scraping or thumping that changes when you push up on the front edge of the drum. The definitive test is to unplug the dryer, remove the belt, and spin the drum by hand: if you hear or feel a rough grind from the rear, the bearing cup is the problem.
- When should I replace just the cup versus ordering the full bearing kit?
- Remove the drum and inspect all three rear bearing components: the cup (this part), the ball bearing, and the support shaft. If the cup is worn or grooved but the ball bearing is still round and smooth with no flat spots, and the shaft has no visible scoring where the ball sits, the cup alone is the right repair. If the ball has a flat spot, pitting, or scoring, or if the shaft is grooved or scored, the full rear bearing kit (5303281153) gives you all three components plus the ball bearing clip and high-temperature lubricant for a complete rebuild. It is often worth ordering the kit if the dryer is older and you want to avoid opening it up again in a year.
- What are the metal filings I found inside the dryer cabinet?
- Metal filings inside the cabinet are the most common sign that the bearing cup has been worn through completely. When the plastic cup wears away, the steel ball bearing grinds directly against the steel rear panel. This metal-on-metal contact produces fine metallic filings and dark powder that accumulate inside the cabinet and can get into the drum, leaving dark marks or streaks on clothes. If you see metal filings, the cup has been worn for some time — inspect the rear panel for scoring and the ball bearing for damage. A deeply grooved rear panel may need to be smoothed with sandpaper before the new cup is installed.
- Can a worn bearing cup damage my clothes?
- Yes. When the bearing cup wears through and the ball grinds against the metal rear panel, it produces fine metal filings that accumulate inside the cabinet. These filings can transfer to clothing during tumbling, leaving dark streaks, marks, or metallic residue that can be difficult to remove. If your dryer has started leaving unexplained marks on clothes and you also hear a grinding noise, the bearing cup is a likely cause. Replacing the cup and thoroughly cleaning the interior of the cabinet — including vacuuming all metal filings and wiping down surfaces — should resolve both the noise and the clothing marks.
- How long does the bearing cup replacement take?
- For someone comfortable with basic appliance repair, the job typically takes about one hour. The time-consuming part is accessing the bearing — you need to remove panels and the drum to reach the rear bearing cup. The cup itself swaps in minutes once the drum is out. Use the opportunity to clean all lint buildup from inside the cabinet, inspect the belt and idler pulley, and check the front drum glides or felt seal for wear. These components wear on a similar timeline, and they are much easier to replace with the drum already removed than as a separate job later.
Have a question?

131825900 Dryer Genuine OEM Drum Bearing Cup

