Skip to product information
Sale
  • Sku: XPDC47-00018A

XPARTCO DC47-00018A Dryer Hi limit Thermostat

List Price:  $15.00
$10.95
 per 

FREE SHIPPING TO ALL 48 CONTIGUOUS STATES
Free standard shipping at checkout.

CHECK YOUR MODEL COMPATIBILITY

Enter your appliance model number to check if this part is listed as compatible.

Need help finding your model number?

Guaranteed safe checkout

Product description

XPARTCO DC47-00018A Dryer Hi Limit Thermostat

The XPARTCO DC47-00018A is an aftermarket replacement cycling high-limit thermostat for Samsung and select Kenmore electric dryers. It is a true, automatically resetting thermostat, not a one-time fuse. It watches the temperature in the heating circuit and opens to cut power to the heating element at about 260°F to protect the dryer from overheating. When the temperature falls to around 210°F it closes again by itself, so the dryer can resume heating without any part being replaced.

This thermostat works with a downstream thermal fuse (such as our DC96-00887C listing) in the same overheat-protection circuit. If it cycles too often, trips early, or fails to regulate temperature, it can stress that thermal fuse and sometimes cause it to blow as a last-resort safety measure. Signs of a failing high-limit thermostat include no heat or too little heat, drying that takes too long, or the dryer shutting off before a load is dry. It directly replaces 35001092, WP35001092, 1122485, AP4201898, PS4205217, EAP2430930, PS2430930, and AP6008682.

Quick Answer

Choose the XPARTCO DC47-00018A Dryer Hi Limit Thermostat for Samsung and select Kenmore electric dryers with no heat or too little heat, drying that takes too long, or premature shutoff before a load is fully dry. Opens at approximately 260°F, resets automatically around 210°F. Replaces 35001092, WP35001092, 1122485, AP4201898, PS4205217, EAP2430930, PS2430930, AP6008682. This is a resettable thermostat, not a fuse — it does not need replacement after each trip. It's a different component from our DC96-00887C thermal fuse listing, though the two are often checked together.

Common Problems This Part Fixes

  • Dryer has no heat or insufficient heat
  • Drying takes too long to complete a cycle
  • Dryer shuts off too soon, before clothes are fully dry
  • Timer will not advance through the cycle
  • Dryer that stopped working suddenly after running unusually hot
  • Dryer with a history of repeated downstream thermal fuse failures

Cross Reference Information

Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.

Replaces Part Numbers

This dryer high-limit thermostat directly replaces the following OEM and cross-reference part numbers:

DC47-00018A, AP4201898, T-O-D 60T11, ASM33627, 1122485, PD00002011, PS4205217. WP35001092, 35001092, PD00004704, EAP11741822, AP6008682, AWP47350, PS11741822, L260-50F

If your part number is not listed above, contact our support team before ordering and we will verify compatibility.

Compatibility

This high-limit thermostat is compatible with select Samsung electric dryers, and also fits select Kenmore dryers built on the Samsung platform, including model numbers such as:

  • DV5471AEW/XAA
  • DV40J3000EW/A2, DV42H5000EW/A3, DV45H7000EW/A2, DV48H7400EW/A2
  • DV400EWHDWR/AA
  • DVE50M7450W/A3

Note — resettable thermostat, not a fuse: This DC47-00018A is a true cycling thermostat that resets itself automatically. Our DC96-00887C listing, despite frequently being labeled a "thermostat" on other marketplaces, is actually a one-time thermal fuse mounted separately on the blower housing — it cannot reset and must be replaced once blown. The two are different device types serving the same circuit. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.

Key Features

  • Aftermarket replacement cycling high-limit thermostat — automatically resetting, no replacement needed after each trip
  • Opens at approximately 260°F, resets around 210°F
  • Resolves "no heat," "insufficient heat," "takes too long to dry," and "shuts off too soon" symptoms
  • Genuine thermostat, distinct from the downstream thermal fuse in the same circuit
  • No special tools required for installation
  • Replaces 35001092, WP35001092, 1122485, AP4201898, PS4205217, EAP2430930, PS2430930, and AP6008682
  • Compatible with Samsung and select Kenmore electric dryers
  • Aftermarket replacement built to OEM-equivalent quality standards

Product Specifications

Part Number XPDC47-00018A
OEM Part Number DC47-00018A
Part Type Dryer Cycling High-Limit Thermostat
Condition Aftermarket Replacement
Type Automatically resetting — not a one-time fuse
Open Temperature ~260°F
Reset Temperature ~210°F
Related Component DC96-00887C thermal fuse (blower housing, different device, sold separately)
Quantity 1 high-limit thermostat
Compatible Brands Samsung, select Kenmore

Installation Notes

⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel, near the heater duct and blower housing area where this thermostat is mounted. Photograph the wiring connections before disconnecting anything, since this thermostat can be positioned close to other similar-looking components in the same circuit. Remove the old thermostat from its mounting position, noting orientation, and disconnect its wiring. Install the new DC47-00018A in the same position, reconnecting wiring exactly as photographed. Reassemble the panel, restore power, and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: Phillips or nut driver (model-dependent), work gloves.

Frequently Asked Questions

Do I need to reset this thermostat after it trips, or replace it?

Neither, in normal use. This is a true cycling thermostat that resets itself once the dryer cools to about 210°F. Replace it only if it has actually failed (stuck open, stuck closed, or no longer switching at the right temperatures), not just because it tripped once during normal operation.

My dryer shuts off before the load is fully dry. Is that this part?

It's a strong possibility. If this high-limit thermostat is tripping prematurely — opening at a lower temperature than it should — the dryer can cut heat and end the cycle early even though the load isn't actually dry yet. This is one of the more common symptoms this thermostat addresses.

My thermal fuse keeps blowing. Could this thermostat be the underlying cause?

Yes, this is worth investigating. This thermostat and the downstream thermal fuse (our DC96-00887C listing) protect the same circuit at different points. If this thermostat isn't regulating temperature correctly — cycling excessively or failing to catch a temperature spike — the thermal fuse can end up blowing repeatedly as the last line of defense. If you've replaced the fuse more than once, checking or replacing this thermostat at the same time is a reasonable next step.

Is this an OEM or aftermarket part?

This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications and opening/reset temperatures of the original DC47-00018A high-limit thermostat used in compatible Samsung and Kenmore electric dryers.

Shop With Confidence

Express Parts Direct is a U.S.-based appliance parts retailer offering genuine OEM and high-quality replacement parts for all major brands, with fast shipping from our U.S. warehouse. Our team can help verify compatibility before you buy.

✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
View full details
XPARTCO DC47-00018A Dryer Hi limit Thermostat

XPARTCO DC47-00018A Dryer Hi limit Thermostat

List Price:  $15.00
$10.95
 per 
SUBHEADING

Recently viewed products

Free Shipping

Fast, Free Shipping – No Surprises, Just Savings! Enjoy FREE shipping on all orders within the continental United States. No minimums, no hidden fees—just the parts you need, delivered straight to your door at no extra cost!

Top-notch support

Because Your Time Matters! At Express Parts Direct, we’re committed to providing exceptional customer service. Whether you need help finding the right part, troubleshooting an issue, or tracking your order, our knowledgeable team is here to assist you every step of the way. Experience fast, friendly, and expert support—because you deserve the best!

Satisfied or refunded

100% Satisfaction or Your Money Back! We stand by the quality of our parts and service. If you’re not completely satisfied, we’ll make it right—or refund your purchase. Shop with confidence knowing that your satisfaction is our priority!