XPARTCO MDS47123601 Washer Door Boot Gasket
- Sku:
- MDS47123601-ERP
- Vendor:
- XPARTCO
Have a question?
XPARTCO MDS47123601 Washer Door Boot Gasket
MDS47123601 Washer Door Boot Gasket Seal
The XPARTCO MDS47123601 is an aftermarket replacement front-load washer door boot seal (also called a door gasket or door diaphragm) compatible with select LG and Kenmore front-load washers in the WM2801, WM2901, and WM3001 series. The door boot gasket is the flexible rubber bellows seal that stretches between the door opening on the washer cabinet and the drum opening. It creates a watertight seal every time the door is closed and also acts as a flexible connector that accommodates drum movement during the spin cycle. When the gasket tears, cracks, develops holes, or accumulates mold that cannot be cleaned away, water leaks from the door area and the washer must be repaired before it can be used safely.
Made from durable EPDM rubber, this door boot gasket is a direct replacement for OEM part MDS47123601 and cross-references AP4998888, AH3535209, EA3535209, PS3535209, and 1464249. Compatible LG models include WM2801HLA, WM2801HRA, WM2801HWA, WM2901HVA, WM3001HPA, WM3001HRA, and WM3001HWA, as well as Kenmore 796-series models built on the LG platform. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO MDS47123601 Washer Door Boot Gasket fixes LG and Kenmore front-load washers that are leaking water from the door area, have a visibly torn or cracked door seal, or have persistent mold that cannot be cleaned. EPDM rubber. Compatible with LG WM2801, WM2901, WM3001 series and Kenmore 796-series. Replaces AP4998888, AH3535209, PS3535209, and 1464249. Installs in 30–60 minutes.
Common Problems This Part Fixes
- Water leaking from the front of the washer, around the door opening
- Puddles of water on the floor in front of the washer during or after a cycle
- Visible tear, crack, puncture, or hole in the door boot seal
- Persistent mold or mildew inside the folds of the gasket that cannot be cleaned away
- Gasket pulling away from the drum opening or door frame
- Musty or mildew odor coming from the washer that persists despite cleaning
- Small items (coins, socks) getting stuck in a damaged or separated gasket
Replaces Part Numbers
This door boot gasket directly replaces the following OEM and cross-reference part numbers:
MDS47123601, AH3535209, ALG55741, AP4998888, EA3535209, EAP3535209, PD00041241, PS3535209.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the MDS47123602 is a different gasket for a different series of LG models — verify your model number before ordering.
Compatibility
This door boot gasket is compatible with select front-load washers from the following brands and models:
- LG WM2801HLA, WM2801HRA, WM2801HWA
- LG WM2901HVA
- LG WM3001HPA, WM3001HRA, WM3001HWA
- LG F1314FDS, F1314FDS1, F1314FDS2
- LG F1354FDS, F1354FDS1, F1354FDS3
- LG F1355FDS5
- Kenmore 796.41022900, 796.41028900, 796.41029900, 796.42192900, 796.42198900, 796.42199900
Important: LG uses several different door boot gaskets across its front-load washer lineup — the MDS47123601 is specific to the WM2801, WM2901, and WM3001 series. Other LG models use MDS47123602, MDS47123604, MDS47123608, or other variants. Always verify your exact model number before ordering.
Key Features
- Creates a watertight seal between the washer door and drum opening on every wash cycle
- Flexible EPDM rubber bellows design accommodates drum movement during high-speed spin cycles
- Durable EPDM rubber — resistant to detergent, hot water, and the repeated flexing of normal wash use
- Direct replacement for MDS47123601 — compatible with LG WM2801, WM2901, WM3001 series and Kenmore 796-series models
- Cross-references AP4998888, AH3535209, EA3535209, PS3535209, and 1464249
- Aftermarket replacement built to OEM-equivalent quality standards
- DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
| Part Number | MDS47123601 |
| Part Type | Front-Load Washer Door Boot Gasket / Door Seal / Door Diaphragm |
| Condition | Aftermarket Replacement |
| Material | EPDM Rubber |
| Color | Gray |
| Application | Front-Load Washers |
| Compatible Series | LG WM2801, WM2901, WM3001 series; Kenmore 796-series (LG-built) |
| Compatible Brands | LG, Kenmore |
Installation Notes
Frequently Asked Questions
What is the difference between MDS47123601 and MDS47123602?
These are two different door boot gaskets for different LG washer model series — they are not interchangeable. The MDS47123601 is for the WM2801, WM2901, and WM3001 series. The MDS47123602 is used on a different set of LG front-load models including the WM3250, WM3050, and WM3370 series. Always verify your exact LG model number before ordering to confirm which gasket your washer requires.
Can I clean the door boot gasket instead of replacing it?
If the gasket is in good physical condition but has mold or mildew buildup in the folds, cleaning is often effective. Wipe the inside and outside of the gasket with a solution of warm water and white vinegar or a diluted bleach solution (1/4 cup bleach per quart of water), getting into the folds where mold accumulates. Leave the door open between washes to allow the gasket to dry out. However, if the gasket has a physical tear, hole, crack, or is pulling away from the door frame, it must be replaced — cleaning will not restore a structural seal.
How long does it take to replace the door boot gasket?
For most DIYers, door boot gasket replacement on LG front-load washers takes approximately 30–60 minutes. The most time-consuming steps are removing the front panel and working with the inner and outer retaining springs. A spring removal tool (sold separately) makes reinstalling the retaining springs significantly faster and reduces the risk of tearing the new gasket during installation. Watching a model-specific installation video before starting is highly recommended.
Will water in the drum area cause mold on the new gasket?
Yes — mold on door boot gaskets is a very common issue with front-load washers because water and detergent residue tend to sit in the folds of the gasket between washes. To prevent mold on the new gasket, leave the washer door slightly open after each wash cycle to allow the interior and gasket to dry out. Periodically wipe the inside of the gasket folds with a clean dry cloth after washing. Running a monthly machine clean cycle or empty hot wash with washer cleaner also helps reduce residue buildup.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from durable EPDM rubber to match the dimensions and sealing performance of the original MDS47123601 door boot gasket.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Model Compatibility
Search your appliance model number below. Supports partial or full model search.
🔍 Search Model Number
Type your full or partial model number above to instantly check if this part fits your appliance.
| Model Number | Manufacturer | Appliance Type |
|---|
⚠️ This is a partial compatibility list. Always verify your appliance model number before ordering. Contact our support team if you’re unsure.