XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor

XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor – Compatible with LG and Kenmore Refrigerators

Product Description

Keep your refrigerator cooling evenly with the XPARTCO 4681JB1029A Refrigerator Evaporator Fan Motor. This Fan Motor is a replacement component for specific LG, Kenmore refrigerator models. It operates the circulation fan located in the back of the refrigerator compartment, distributing cool air evenly throughout. The motor enables constant airflow across shelves and compartments to maintain consistent temperatures and humidity levels. Causes of a bad fan motor include failure of bearings or windings due to prolonged use.

Replaces Part Numbers

4681JB1029A, EAU60694507, 1330410, 4681JB1010C, 4681JB1017A, 4681JB1017D, 4681JB1027A, EAU61762902, EAU41921810, PD00037982, EAP3523328, AH3523328, EA3523328, AP4438221, PS3523328. 

Compatibility

This replacement evaporator fan motor fits select LG and Kenmore refrigerators.

Example compatible models include (but are not limited to): LG LFX25960ST, LG LFX28968ST, and Kenmore 795.77543600.

Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Built to meet OEM airflow and reliability standards

• ❄️ Efficient Air Circulation – Distributes cold air evenly through refrigerator and freezer

• 💰 Affordable Solution – Quality replacement at a lower cost than OEM parts

• 🛠️ DIY Installation – Simple plug-in wiring connector for quick installation

• 🛡️ Fixes Common Issues – Solves frost buildup, uneven cooling, or noisy fan problems

📐 Product Specification

• Part Number: 4681JB1029A

• Component Type: Refrigerator Evaporator Fan Motor

• Material: Metal motor housing with balanced plastic fan blade

• Mounting: Direct-fit replacement in freezer evaporator compartment

• Operating Conditions: Designed for continuous low-temperature operation

• Compliance: Built to OEM-equivalent quality standards (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver

⚠️ Safety First: Always unplug the refrigerator before performing repairs to prevent electrical shock.

Steps:

1. Unplug the refrigerator.

2. Remove shelves and freezer rear panel to access the evaporator area.

3. Disconnect the wiring harness and mounting screws on the old fan motor.

4. Install the new XPARTCO 4681JB1029A motor, reconnect wiring, and secure the panel.

5. Restore power and verify quiet, consistent airflow.

⏱️ Time Required: 20–25 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Appliance Parts Supplier

• 🔄 30-Day Return Policy

Restore efficient, even cooling — Add to Cart Now for a reliable, budget-friendly repair!