XPARTCO 35001191 Dryer Thermistor Replaces WP35001191

XPARTCO 35001191 Dryer Thermistor – Replaces WP35001191 – Compatible with Whirlpool, Maytag & Kenmore Dryers

Product Description

Maintain accurate temperature control and efficient drying with the XPARTCO 35001191 Dryer Thermistor. This Dryer Thermistor is a replacement part for specific Whirlpool, Kenmore, Maytag dryer models, that is responsible for monitoring and controlling the temperature within the dryer drum. This sensor prevents overheating or under-heating, which can affect drying performance and fabric care. The thermistor communicates temperature readings to the dryer's control board, which then adjusts the heat accordingly to maintain the desired temperature settings.

Replaces Part Numbers

WP35001191, 35001191, 1185513, PD00003059, EAP11741828, AP6008688, PS11741828. 

Compatibility

This replacement dryer thermistor fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Estate electric dryers.

Example compatible models include (but are not limited to):
Whirlpool WED4815EW1, Maytag MEDC215EW1, Kenmore 110.65132411.

Always verify your dryer’s model number before ordering.
Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Matches OEM temperature-sensing accuracy

• 🌡️ Precise Heat Regulation – Helps control dryer temperature efficiently

• 🔧 Reliable Sensor Performance – Sends accurate feedback to control board

• 💰 Cost-Effective Repair – Quality alternative to OEM thermistors

• 🛡️ Fixes Common Issues – Resolves overheating, no heat, long dry times, or error codes

📐 Product Specification

• Part Number: 35001191

• Component Type: Dryer Thermistor / Temperature Sensor

• Application: Exhaust temperature monitoring

• Material: Heat-resistant sensor body with wire leads

• Mounting: Screw-mounted on blower housing

• Compliance: Built to OEM-equivalent quality standards (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver

⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.

Steps:

1. Disconnect dryer power and remove the rear panel.

2. Locate the thermistor on the blower housing.

3. Disconnect the wiring harness and remove mounting screws.

4. Install the new XPARTCO 35001191 thermistor.

5. Reconnect wiring, reinstall panel, and restore power.

6. Run a test cycle to confirm proper temperature regulation.

⏱️ Time Required: 10–15 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Appliance Parts Supplier

• 🔄 30-Day Return Policy

Restore accurate dryer temperature control — Add to Cart Now for a dependable, budget-friendly repair!