XPARTCO 279769 Dryer Thermostat Kit

XPARTCO 279769 Dryer Thermostat Kit – Compatible with Whirlpool, Maytag & Kenmore Dryers

Product Description

Restore proper dryer heat regulation and safety with the XPARTCO 279769 Dryer Thermostat Kit. This Thermal Cut-Off Kit is a replacement part for specific Kenmore, Whirlpool dryer models. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.

Replaces Part Numbers

279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, L250-80F, AH334278, EA334278, PD00002485, EAP334278, AP3094224, PS334278.

Compatibility

This replacement dryer thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.

Example compatible models include (but are not limited to):
Whirlpool WED4800XQ, WED4815EW1
Maytag MEDC215EW1
Kenmore 110.6012010

Always verify your dryer’s model number before ordering.
Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement Kit – Designed to match OEM temperature regulation

• 🌡️ Accurate Heat Cycling – Helps maintain proper drying temperatures

• 🔥 Overheat Protection – Reduces risk of thermal fuse failures

• 💰 Cost-Effective Repair – Reliable alternative to OEM thermostat kits

• 🛡️ Fixes Common Issues – Resolves no heat, overheating, and long dry times

📐 Product Specification

• Part Number: 279769

• Component Type: Dryer Thermostat Kit

• Includes: Operating thermostat and high-limit thermostat

• Application: Heater housing / exhaust temperature control

• Material: Heat-resistant metal thermostat housings

• Mounting: Screw-mounted

• Quality Level: Aftermarket replacement (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver

⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.

Steps:

1. Disconnect dryer power.

2. Remove the rear access panel.

3. Locate the thermostats on the heater housing.

4. Disconnect wiring and remove old thermostats.

5. Install the new XPARTCO 279769 components in the same positions.

6. Reconnect wiring, reinstall panel, and restore power.

7. Run a test cycle to confirm proper heating.

⏱️ Time Required: 15–25 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Appliance Parts Supplier

• 🔄 30-Day Return Policy

Restore proper dryer temperature control and safety — Add to Cart Now for a dependable, budget-friendly repair!