197XP Dryer Thermostat Kit Replaces 279816, WP3977767, W10900067

197XP Dryer Thermostat Kit – Replaces 279816, WP3977767, W10900067 – Compatible with Whirlpool, Kenmore, Maytag, and Amana Dryers

Product Description

Restore safe and efficient drying performance with the 197XP Dryer Thermostat Kit. This high-quality aftermarket replacement includes both a high-limit thermostat and a thermal cut-off fuse to regulate dryer temperature and prevent overheating. A failed thermostat or cut-off can cause long dry times, no-heat conditions, or overheating. Installing this complete kit ensures dependable temperature control and long-lasting dryer operation.

Replaces Part Numbers

279816, 2651, 279816VP, 3399848, 3977393, AH334299, AP3094244, EA334299, PS334299, WP3977767, 3977767, 3399693, 898078, AP6009043, ER3977767, PS11742185, SET185, TJ90SET185, WP3977767VP, W10900067, PD00046493, EAP11769432, AP6036100, PS11769432.

Compatibility

This replacement thermostat kit fits select Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley, and Estate dryers.

Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Kenmore 110.87562602, and Amana NED4655EW1.

Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Designed to match OEM temperature ratings and safety standards

• 🔥 Dual-Protection Design – Includes thermal cut-off fuse and high-limit thermostat for overheat prevention

• 💰 Affordable Alternative – Provides OEM-level performance at a lower cost

• 🛠️ Easy DIY Installation – Pre-terminated connectors and hardware for quick repair

• 🛡️ Fixes Common Issues – Solves dryer not heating, overheating, or short-cycling problems

📐 Product Specification

• Part Number: 197XP

• Temperature Ratings: 309* degree F Thermal Fuse with L250-80* degree F Limit Thermostat.
• High Limit Thermostat and Thermal Fuse for the Heater.     
• No need to splice any wires, no re wiring needed. 
• Component Type: Dryer Thermal Cut-Off & High-Limit Thermostat Kit
• Includes: Thermal cut-off fuse, high-limit thermostat, mounting hardware, and wire connectors
• Material: Metal thermostat housing with heat-resistant wiring
• Compliance: Built to OEM-equivalent quality standards (not OEM)

🛠️ Installation Notes

Tools Needed: Nut driver, Phillips screwdriver

⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.

Steps:

1. Disconnect power and remove the back panel of the dryer.

2. Locate the heater housing and identify the existing thermostat and cut-off fuse.

3. Remove wires and mounting screws from old components.

4. Install the new 197XP thermostat kit in the same positions.

5. Reconnect wires, reassemble the panel, and restore power.

6. Run a drying cycle to confirm proper operation.

⏱️ Time Required: 15–25 minutes

📦 Shop With Confidence

• 🚚 Free Shipping on All Orders

• ⚙️ Trusted Appliance Parts Supplier

• 🔄 30-Day Return Policy

Protect your dryer and restore heat safely — Add to Cart Now for a reliable, budget-friendly repair!